5" Liquid Crystal Display Television WT0C-15A1 Batman visit NTSCTVTWEN1203 MAC-001153
Table of Contents 1. 2. 3. 4. 5. 6. Warranty and Service .................................................... 3 Preface ......................................................................... 4 Description of Warning Symbols ..................................... 5 Safety Notices ............................................................... 6 Regulatory Information ................................................ 14 Introducing the TV ....................................................... 16 Features .
Table of Contents 12. 13. 14. 15. 2 Mute ................................................................... Video Setting ........................................................... Hue .................................................................... Saturation ........................................................... Sharpness .......................................................... Color Temperature .............................................. TV Setting .....................................
1 Warranty and Service The instructions on this manual are for the model(s) listed on the front cover. Before you start reading, check your product number by looking at the rear of your TV. Thank you for purchasing our Liquid Crystal Display Television (LCD TV). With this product, you will be able to enjoy superior audio and video while enriching your lifestyle with advanced technology.
2 Preface This manual is designed to assist users in setting up and using the LCD TV. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Copyright © Copyright 2003 Hannspree, Inc. All rights reserved. This product and related documentation are protected by copyright and are distributed under licenses restricting their use, copying, and distribution.
3 Description of Warning Symbols Warning Caution This symbol is used to remind users to pay attention to important descriptions regarding usage and maintenance (repair) or additional important information related to this product. This symbol is used to remind users to pay attention to the danger of electric shocks due to dangerous internal noninsulated components. Electric Power Notice Electric power may cause personal injury and mechanical damage if it is misused.
4 Safety Notices Power Supply Safety Notes 1. To avoid electric shocks, do not use an extended power cord or an outlet that does not match this product's plug or leaves the plug exposed. 2. This product has a 3-pin grounded plug. The third pin connects to ground; do not remove it. 3. If the power cord or plug is damaged or worn, unplug it immediately and contact a qualified service technician for maintenance. 4. To avoid fire or electric shocks, do not overload electric power outlets.
Before You Proceed 1. Read the Safety Notices and the User’s Manual carefully before turning the product on. 2. Keep your User’s Manual in a safe place for future reference. Keep the box and packaging in case the product needs to be shipped in the future. 3. Follow the product and warning label instructions. 4. Any changes or modifications that do not follow the instructions in this manual will void this product's warranty.
Optimal Viewing Distance 8
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
10. Protect the power cord from being walked on or pinched particularly at the plug, convenience receptacles, and the point where they exit from the apparatus. 11. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12. Only use attachments/accessories specified by the manufacturer. 13.
Personal Safety To avoid overloading the power supply, do not plug too many electrical devices into an outlet or extension cable. Dangerous high-voltage electric power components are located inside the TV. To avoid electric shock, do not disassemble the casing. Do not place or drop metals, small objects, or flammable materials in the vent to avoid an electric shock or a fire.
Installation To avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vents. Install the outdoor antenna far from power transmission lines to avoid possible danger. Remove the power cord and antenna connector when there is a storm or when the TV is not in use for a long period to avoid electric shock from lightning.
Operation V This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric shock or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service technician if you cannot plug it in correctly. If there is any problem that cannot be resolved according to the instructions given in this manual, notify a qualified service technician immediately. Do not attempt any methods not covered in this manual.
5 Regulatory Information FCC Compliance Statement1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
DOC Compliance Notice1 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.This device complies with Canada ICES-003 Class B.
6 Introducing the TV Thank you for purchasing this 15-inch Liquid Crystal Display TV. Your LCD TV is designed to be safe, versatile, and easy to use. The design of the product is based on Gotham City, which makes it a fun addition to any room. You can watch broadcast or cable television channels, and easily connect a VCR, VCD or DVD player or a game device to the standard RCA and S-Video input ports that are included in the 4-IN-1 cable.
7 Checking Package Contents Make sure the following components are included in the box. Contact your vendor immediately if anything is missing or damaged.
8 Getting to Know Your TV Front View 1 2 Signal sensor 3 4 5 6 7 Description Function Power/ Power LED Turns the TV on and off. Green LED indicates power on. 2 Select channel Changes channels. Press CH to increase the channel number. Press CH to decrease the channel number. In PC or AV mode, press either button to return to TV mode. 3 Adjust volume 4 Source 5 Menu 6 Auto/Mute 7 Stereo speakers ^ Press VOL to increase the audio volume. Press VOL to decrease the audio volume.
Input and Output Ports LINE-OUT DC-IN 1 2 Description LINE-IN R-AUDIO-L AV2 VIDEO VGA 34 5 6 7 ANT 8 9 10 Function 1 LINE OUT Connects to external amplifier or speakers. 2 DC 12V Connects to the included power adapter. 3 LINE IN Connects to a PC's line out port.
4 AV2 Use the included 4-IN-1 Audio/Video cable to connect external devices, such as a VCR, VCD, or DVD player. Audio Input: AV connectors white and red audio cables. Video Input: AV connector video (yellow) or S-Video cables. 5 HEADPHONE Connects to headphones. 6 R-AUDIO Connects to a right audio (red) cable 7 VGA Connects to a PC. 8 L-AUDIO Connects to a left audio (white) cable 9 ANT Connects to an antenna or CATV cable television line.
9 Getting Started Connecting to an Antenna or Cable TV 1 Connect one end of the UHF or CATV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV. 2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to the antenna socket or CATV cable. Antenna LINE-OUT DC-IN LINE-IN AV2 R-AUDIO-L VGA ANT jack (VHF/UHF IN jack) VIDEO ANT Antenna/CATV socket Antenna/CATV coaxial cable Note If you cannot receive channels after connecting to an antenna or cable TV line, try scanning for channels.
Connecting to AV Devices Connect external devices such as a VCR, VCD or DVD player, or video game to the TV using the 4-IN-1 cable. Connecting to a VCR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player. Actual connections may vary according to the make and model of the device. Refer to the user’s manual included with the device for more detailed instructions.
Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digital camera. Actual connections may vary according to the make and model of the device. Refer to the user’s manual included with the camcorder or camera for more detailed instructions.
Connecting to a Game Device The instructions presented here are a general guide to connecting the TV to a game device using the RCA Jacks provided (some game devices may require a unique adapter that is not provided). Actual connections may vary according to the make and model of the game device. Refer to the user’s manual included with the game device for more detailed instructions.
Connecting External Speakers or Headphones External speakers or headphones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers or headphones to the speaker or headphone line out port as illustrated. Headphones LINE-OUT DC-IN Speakers LINE-IN AV2 R-AUDIO-L VGA VIDEO ANT Speakers Headphone line out port Notes • External speakers or headphones are not included with the product.
Connecting to a PC You can connect the TV to a PC and use it as an external monitor. Connect the TV’s VGA port to the PC’s VGA port. Connect the TV’s line in port to the PC’s line out port to listen to the PC’s audio output on the TV’s speakers. Refer to the following illustration.
Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV. 3 Insert the three-pronged plug at the other end of the power cord into a power outlet.
10 Using the TV Using the Remote Control For best results, use the remote control within a distance of 5 meters from the front of the TV’s signal sensor. Do not exceed an angle of 30 degrees when pointing at the signal sensor. Refer to the following illustration.
Turning the TV On and Off 1 Press the POWER button on the remote control (or control panel). The power LED on the side of the TV changes from red to green, indicating that the power has been turned on. 2 Press the POWER button again; the power LED changes from green to red, indicating that the Power button/ Power LED TV is in off mode. Selecting Channels Press CH UP or CH DOWN button on the control panel to select the channel or enter the specific channel number buttons on the remote contorl.
Switching Source Signals Press the SOURCE button to select the in coming source signal. TV:40 The current source setting (TV/CATV, AV1, AV2 or PC ) appears on the upper left corner of the screen. Source Note The TV supports S-Video input in addition to normal video and audio signals. The TV detects the signal type automatically and gives priority to SVideo when two signals are detected at the same time. Adjusting the Volume Press VOL UP button to increase the volume.
11 Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describes how to change each of the available settings. The OSD can be used with either the remote control or the control panel. Button Descriptions Control Panel MENU MENU CH UP CH ∧ CH DOWN CH ∨ ENTER MENU Note: The following sections explain how to adjust settings in the OSD menus using the control panel.
Brightness 1 Press MENU to enter the OSD PC menus. Brightness&Contrast 2 5 Brightness Contrast 2 Press the CH UP button or CH DOWN button to select Brightness Return Adjust Menu Next & Contrast. 3 Press MENU to enter the Brightness & Contrast menu. 4 Press the CH UP button to increase the brightness. Press the CH DOWN button to decrease the brightness. 5 Press MENU to select Return. 6 Press the CH DOWN button to exit the Brightness & Contrast menu.
Contrast 1 Press MENU to enter the OSD PC menus. Brightness&Contrast 2 5 Brightness Contrast 2 Press the CH UP button or CH DOWN button to select Brightness Return Adjust Menu Next & Contrast. 3 Press MENU to enter the Brightness & Contrast menu. 4 Press MENU to select Contrast. 5 Press the CH UP button to increase the contrast. Press the CH DOWN button to decrease the contrast. 6 Press MENU to select Return. 7 Press the CH DOWN button to exit the Brightness & Contrast menu.
Audio Setting PC Audio Setting Treble Bass Balance SRS Mute L R On On Off Off Return Select Press the MENU button to enter the OSD menus. Menu OK 1 Press the CH UP button or CH DOWN button to select Audio Setting. 2 Press MENU to enter the Audio Setting menu.
Treble 1 Press MENU to enter the OSD PC menus. Audio Setting Treble Bass Balance SRS Mute 2 Press the CH UP button or CH L R On On Off Off Return Adjust Menu DOWN button to select Audio Setting. Next 3 Press MENU to enter the Audio Setting menu. 4 Press the CH UP button to increase the treble. Press the CH DOWN button to decrease the treble. 5 Press MENU to select Return. 6 Press the CH DOWN button to exit the Audio Setting menu.
Bass 1 Press MENU to enter the OSD PC menus. Audio Setting Treble Bass Balance SRS Mute 2 Press the CH UP button or CH L R On On Off Off Return Adjust Menu Next DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu. 4 Press MENU to select Bass. 5 Press the CH UP button to increase the bass. Press the CH DOWN button to decrease the bass. 6 Press MENU to select Return. 7 Press the CH DOWN button to exit the Audio Setting menu.
Balance 1 Press MENU to enter the OSD PC menus. Audio Setting Treble Bass Balance SRS Mute 2 Press the CH UP button or CH L R On On Off Off Return Adjust Menu Next DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu. 4 Press MENU to select Balance. 5 Press the CH UP button to change the balance to the right speaker. Press the CH DOWN button to change the balance to the left speaker. 6 Press MENU to select Return.
SRS This option enables the 3D Surround Sound feature. 1 Press MENU to enter the OSD PC menus. Audio Setting Treble Bass Balance SRS Mute 2 Press the CH UP button or CH L R On On Off Off Return Adjust Menu DOWN button to select Audio Setting. Next 3 Press MENU to enter the Audio Setting menu. 4 Press MENU to select SRS. 5 Press the CH DOWN button to turn the SRS on. Press the CH UP button to turn the SRS off. 6 Press MENU to select Return.
Mute 1 Press MENU to enter the OSD PC menus. Audio Setting Treble Bass Balance SRS Mute 2 Press the CH UP button or CH L R On On Off Off Return Adjust Menu DOWN button to select Audio Setting. Next 3 Press MENU to enter the Audio Setting menu. 4 Press MENU to select Mute. 5 Press the CH DOWN button to turn the mute on. Press the CH UP button to turn the mute off. 6 Press MENU to select Return. 7 Press the CH DOWN button to exit the Audio Setting menu.
Video Setting PC Video Setting Hue Saturation Sharpness Color Temp G R Standard Return Select Press the MENU button to enter the OSD menus. Menu OK 1 Press the CH UP button or CH DOWN button to select Video Setting. 2 Press MENU to enter the Video Setting menu.
Hue 1 Press MENU to enter the OSD PC menus. Video Setting Hue Saturation Sharpness Color Temp G R Setting. Return Adjust 2 Press the CH UP button or CH DOWN button to select Video Standard Menu OK 3 Press MENU to enter the Video Setting menu. 4 Press the CH DOWN button to increase the red hue. The image becomes more red. Press the CH UP button to increase the hue towards the green hue. The image becomes more green. 5 Press MENU to select Return.
Saturation 1 Press MENU to enter the OSD PC menus. Video Setting Hue Saturation Sharpness Color Temp G R Standard DOWN button to select Video Setting. Return Adjust 2 Press the CH UP button or CH Menu Next 3 Press MENU to enter the Video Setting menu. 4 Press MENU to select Saturation. 5 Press the CH UP button to increase the saturation. The screen image becomes more vibrant. Press the CH DOWN button to decrease the saturation. The screen image becomes less vibrant.
Sharpness 1 Press MENU to enter the OSD PC menus. Video Setting Hue Saturation Sharpness Color Temp G R DOWN button to select Video Cold Setting. Return Adjust 2 Press the CH UP button or CH Menu Next 3 Press MENU to enter the Video Setting menu. 4 Press MENU to select Sharpness. 5 Press the CH UP button to increase the sharpness. Press the CH DOWN button to decrease the sharpness. 6 Press MENU to select Return. 7 Press the CH DOWN button to exit the Video Setting menu.
Color Temperature 1 Press MENU to enter the OSD PC menus. Video Setting Hue Saturation Sharpness Color Temp G R DOWN button to select Video Cold Setting. Return Adjust 2 Press the CH UP button or CH Menu Next 3 Press MENU to enter the Video Setting menu. 4 Press MENU to select Color Temp. The following choices are available. Warm Press the CH UP button or CH DOWN button to select Warm. Standard Press the CH UP button or CH DOWN button to select Standard.
TV Setting PC TV Setting TV/CATV CATV STD MTS Dual Yes No Auto Program Manual Program Return Select Press the MENU button to enter the OSD menus. Menu OK 1 Press the CH UP button or CH DOWN button to select TV Setting. 2 Press MENU to enter the TV Setting menu.
TV/CATV 1 Press MENU to enter the OSD PC menus. TV Setting 2 Press the CH UP button or CH TV/CATV AIR TV MTS Dual Yes Auto Program Manual Program No 3 Press MENU to enter the TV Set- Return Adjust DOWN button to select TV Setting. Menu Next ting menu. 4 Select one of the following choices.
MTS 1 Press MENU to enter the OSD PC TV Setting TV/CATV CATV STD MTS Main Yes No Auto Program Manual Program 2 Press the CH UP button or CH DOWN button to select TV Setting. 3 Press MENU to enter the TV Set- Return Adjust menus. Menu Next ting menu. 4 Press MENU to select MTS. The following choices are available.
PC TV Setting TV/CATV CATV STD MTS Dual Yes No Auto Program Manual Program Return Adjust Menu Next DUAL Press the CH UP button or CH DOWN button to select Dual, which enables broadcast of the main signal on one speaker, and the alternate audio signal on the other speaker. 5 Press MENU to select Return. 6 Press the CH DOWN button to exit the TV Setting menu. Note The new setting is confirmed automatically when the OSD times out.
Auto Program 1 Press MENU to enter the OSD PC TV Setting TV/CATV CATV STD MTS Dual Yes No Auto Program Manual Program 2 Press the CH UP button or CH DOWN button to select TV Setting. 3 Press MENU to enter the TV Set- Return Adjust menus. Menu Next ting menu. 4 Press MENU to select Auto Program. 5 Press the CH DOWN button to select Yes. Channel Indicator Channel indicator values scans from 2 to 69 (antenna connection) or from 1 to 125 (CATV cable connection). Auto Program...
Manual Program This function allows you search present channels and erase channels. 1 Press MENU to enter the OSD PC menus. TV Setting TV/CATV CATV STD MTS Dual Yes No Auto Program Manual Program Menu DOWN button to select TV Setting. 3 Press MENU to enter the TV Set- Return Adjust 2 Press the CH UP button or CH Next ting menu. 4 Press MENU to select Manual Program. 5 Press the CH UP button to enter the PC Manual Program 2 Manual Program Down Add/Erase Add Up Erase Manual Program menu.
Channel Add/Erase After you have found a channel using Manual Program, follow the following instruction to add or erase the channel. 1 Press MENU to select Add/Erase. PC Manual Program 2 Manual Program Down Add/Erase Add Up Erase 2 Select one of the following options. Add Channel Return Adjust Menu Next Press the CH DOWN button to select Add. The channel is added to the channel list. Erase Channel Press the CH UP button to select Erase. The channel is erased from the channel list.
PC Setting PC PC Setting 50 16 0 1688 H.Position V.Position Phase Clock More Option Return Select Press the MENU button to enter the OSD menus. Menu OK 1 Connect product to a PC. 2 Press SOURCE to select PC. 3 Press the CH UP or CH DOWN button to select PC. 4 Press MENU to enter the PC menu.
Horizontal Position 1 Press MENU to enter the OSD PC menus. PC Setting 50 16 0 1688 H.Position V.Position Phase Clock More Option Return Adjust Menu Next 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Setting menu. 4 Press the CH UP button to move the display to the right. Press the CH DOWN button to move the display to the left. 5 Press MENU to select Return. 6 Press the CH DOWN button to exit the PC setting menu.
Vertical Position 1 Press MENU to enter the OSD PC menus. PC Setting 50 16 0 1688 H.Position V.Position Phase Clock More Option Return Select menu Menu OK 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Setting menu. 4 Press MENU to select V.Position. 5 Press the CH UP button to move the display up. Press the CH DOWN button to move the display down. 6 Press MENU to select Return. 7 Press the CH DOWN button to exit the PC setting menu.
Phase 1 Press MENU to enter the OSD PC menus. PC Setting 50 16 0 1688 H.Position V.Position Phase Clock More Option Return Adjust Menu Next 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Setting menu. 4 Press MENU to select Phase. 5 Press the CH UP button to increase the phase. Press the CH DOWN button to decrease the phase. 6 Press MENU to select Return. 7 Press the CH DOWN button to exit the PC setting menu.
Clock 1 Press MENU to enter the OSD PC menus. PC Setting 50 16 0 1688 H.Position V.Position Phase Clock More Option Return Adjust Menu Next 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Setting menu. 4 Press MENU to select Clock. 5 Press the CH UP button to increase the clock. Press the CH DOWN button to decrease the clock. 6 Press MENU to select Return. 7 Press the CH DOWN button to exit the PC setting menu.
Color Temperature 1 Press MENU to enter the OSD PC menus. PC Setting 50 16 0 1688 H.Position V.Position Phase Clock More Option Return Select menu Menu OK 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Setting menu. 4 Press MENU to select the More option. PC More Option DOS Mode Color Temp Text Standard Return Adjust Menu Next 5 Press the CH UP button to enter the Color Temp menu. 6 Press MENU to select Color Temp.
User PC More Option DOS Mode Color Temp User R : User G : User B : 30 30 30 Return Adjust The User option enables users to make their own color settings. Text User Menu Next Press the CH UP button to select User. The user menu appears. – press MENU to select User R, User G, or User B. – press the CH UP button or CH DOWN button to increase or decrease the selected color temperature. 7 Press MENU to select Return. 8 Press the CH DOWN button to exit the More Option menu.
Miscellaneous Setting PC Miscellaneous Language Sleeper OSD Display Time Setting More Option English Off On Off Return Select Press the MENU button to enter the OSD menus. Menu OK 1 Press the CH UP button or CH DOWN button to select Miscellaneous. 2 Press MENU to enter the Miscellaneous menu.
Language PC Miscellaneous Language Sleeper OSD Display Time Setting More Option English Off On Off menus. 2 Press the CH UP button or CH DOWN button to select Miscellaneous. Return Select 1 Press MENU to enter the OSD Menu OK 3 Press MENU to enter the Miscellaneous menu. 4 Press the CH UP button or CH DOWN button to select Chinese or English. 5 Press MENU to select Return. 6 Press the CH DOWN button to exit the Miscellaneous menu. Note The default language setting is Traditional Chinese.
Sleeper The sleeper turns the TV off automatically after a set period of time. 1 Press MENU to enter the OSD PC Miscellaneous Language Sleeper OSD Display Time Setting More Option English Off On Off 2 Press the CH UP button or CH DOWN button to select Miscellaneous. Return Adjust menus. Menu Next 3 Press MENU to enter the Miscellaneous menu. 4 Press MENU to select Sleeper.
OSD Display When set to Off, the OSD display (source data on top left corner of the TV screen) turns off after approximately 5 seconds. When set to On, the OSD does not turn off automatically. PC Miscellaneous Language Sleeper OSD Display Time Setting More Option English Off On Off menus. 2 Press the CH UP button or CH DOWN button to select Miscellaneous. Return Adjust 1 Press MENU to enter the OSD Menu Next 3 Press MENU to enter the Miscellaneous menu. 4 Press MENU to select OSD Display.
Time Setting This setting allows you to set the TV clock. 1 Press MENU to enter the OSD PC menus. Miscellaneous English Off On Off Language Sleeper OSD Display Time Setting More Option 2 Press the CH UP button or CH DOWN button to select Miscellaneous. Return Adjust Menu Next 3 Press MENU to enter the Miscellaneous menu. 4 Press MENU to select Time Setting. 5 Press the CH UP button to enter the Time Setting menu.
OSD Background This setting allows you to make the OSD background transparent or opaque. 1 Press MENU to enter the OSD PC Miscellaneous Language Sleeper OSD Display Time Setting More Option English Off Off Off 2 Press the CH UP button or CH DOWN button to select Miscellaneous. Return Adjust menus. Menu 3 Press MENU to enter the Miscella- Next neous menu. 4 Press MENU to select More Option. 5 Press the CH UP button to enter PC More Option OSD background Reset On Off the More Option menu.
Reset The Reset function returns all of your TV’s user settings to their factory defaults. Warning: The reset function will erase all of your custom and favorite channel settings, and will reset all display settings (such as contrast, brightness, etc.) to the factory default values. The reset function cannot be reversed once it begins. 1 Press MENU to enter the OSD PC Miscellaneous Language Sleeper OSD Display Time Setting More Option English Off Off Off menus.
Reset ... By default, OFF is already selected (highlighted in yellow). The TV immediately resets when ON is selected and you see the message on the screen. 8 Press MENU to select Return. 9 Press the CH DOWN button to exit the More Option menu.
12 Taking Care of Your TV Turn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprints from the screen. GAS OIL Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid damaging the finish. Wipe the shell with a dry soft cloth and use neutral cleaning fluids. If your model has leather components, wipe the leather parts with a dry cloth and keep the area dry.
13 Troubleshooting Situation Solution • • • No picture and sound. • • • No picture, or poor picture, sound is OK. Picture is not in color. Picture is OK, no sound. One of the speakers has no sound. Can’t receive some TV channels using cable TV. Want to reset TV settings. • • Check the antenna and cable connections. Adjust the brightness in the OSD menus. See “Brightness” on page 32. • Adjust the saturation in the OSD menus. See “Saturation” on page 42.
Situation Solution • No sound but have image. • • • Screen image turns over. Snow appears on the screen. Blurred or overlapped images. Make sure the source device is functioning properly. Set the volume to a higher level. Make sure the audio cable is connected securely. Turn the mute off. • Make sure the video signal cable is connected properly. • Adjust the location of the antenna, placing it far from roads or sources of interference. Check the antenna and the video signal line connections.
14 Specifications WT0C-15A1 LCD Panel Size 15-inch TFT Aspect Ratio 4:3 Best Resolution 1024 (horizontal) x 768 (vertical) Maximum Display Area 304.1 mm (H) x 228.1 mm (W) TV System NTSC Video System VGA input (15 pin D-SUB), S-Video Input and Composite Video Input (through the 4-IN-1 cable) Audio System Line in, Line out 10-pin mini-DIN (Audio Input through the 4-IN-1 Cable) 3.
15 Glossary Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels to viewers (standard TV broadcast). CATV Community Antenna Television, the original name for cable TV. A television distribution system that uses coaxial cable instead of the traditional radio broadcasting (over-the-air) method to deliver television, FM radio, and other services to consumers.
is a trademark of SRS Labs, Inc. SRS technology is incorporated under license from SRS Labs, Inc.
