38,7cm (54.
Regulatory Information ................................................................ 3 Description of Warning Symbols .................................................. 3 Safety Notices ............................................................................. 4 Preface ....................................................................................... 6 Warranty and Service .................................................................. 6 1. Getting Started ....................................
English Table of Contents 4. 5. 6. 7. 8. 2 3.2 Adjusting Picture Settings ................................................ 27 3.3 Adjusting Sound Settings ................................................. 28 3.4 Adjusting Channel Settings for ATV (Analogue TV) ........... 28 3.5 Adjusting DTV Settings .................................................... 30 3.6 Adjusting PC Settings ...................................................... 33 3.7 Adjusting Setup Settings ....................................
English Regulatory Information CE Conformity Statement This device is in conformity with the requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility and Directive 2006/95/EC on the harmonization of the laws of Member States relating to electrical equipment for use within certain voltage limits.
English Safety Notices Installation Safety Notes Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
English Personal Safety 1. To avoid overloading the power supply, never plug too many electrical devices into an outlet, power strip, or extension cable. 2. Dangerous high-voltage electric power components are located inside the TV. To avoid electric shock, do not disassemble the casing. 3. Do not place or drop metals, small objects, or flammable materials into the vent of the TV. 4.
English Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or operating your TV. To ensure the safe and correct installation and operations of the TV, it is important that the safety and operation instructions in this manual are followed.
English Copyright © Copyright 2010 Hannspree, Inc. All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or other third parties).
1 English 1.1 Getting Started Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • TV • User’s manual • Quick start guide • Warranty card • Power cord • Remote control and batteries • TV cleaning cloth • Rubber cover According to WEEE regulation, this TV can’t be handled as normal trash in Europe when it is out of usage.
Introducing the TV You can watch SECAM/ PAL/ DVB-T broadcast, cable, or digital television channels, and easily connect a VCR, STB or DVD player to the SCART, HDTV (Component), AV(Composite), and HDMI input ports (locations of these ports depend on the model). You can also use the TV as a monitor for your PC by connecting it through the VGA port.
English 1.4 Control Panel Description Button Power Function Press to turn the TV on or off. Input source INPUT Press to select the proper input source. Menu MENU Press to open the OSD menu. Program select P Press to increase the program number or move upward to the previous item on the OSD menu. Program select P Press to decrease the program number or move downward to the next item on the OSD menu. Volume adjust VOL + Press to increase the volume or move to the right on the OSD menu.
Connector Service only. Not available for users. Connect to an external device, such as a VCR, STB, or a DVD player. S-VIDEO S-Video Input Composite Input (Video) Composite Inputs (Audio) Function SERVICE Service Connect to an external device, such as a VCR, STB, or a DVD player. VIDEO Connect to an external device, such as a VCR, STB, or a DVD player. R-AUDIO-L Earphone Output Connect to earphones or external speakers with a built-in amplifier. Cable/Antenna Connect to an antenna or cable TV.
English Description Connector VGA (PC) Input Function Connect to a PC’s VGA port. VGA PC Audio Input HDMI 1 Input HDMI 2 Input HDMI 3 Input HDMI 4 Input AUDIO IN HDMI IN 1 HDMI IN 2 HDMI IN 3 HDMI 4 Power Connector 1.6 Connect a HDMI equipment or a HDMIDVI adapter cable to devices such as a DVD player or set-top box. Connect a HDMI equipment or a HDMIDVI adapter cable to devices such as a DVD player or set-top box.
Icon Last Function Use to select a program directly. Press 0-9 to enter the program numbers (press 1 and 0 for program 10). Keypad Pro.List English Description Pro.LIST LAST Press to display the features contained (only for DTV). Press to return to the last channel selected. 1. Press to display current channel/program information. Information INFO Menu MENU OK OK 2.
English Description Icon Press to change the multi sound selection of the TV channel. Dual sound Select program Function P /P Red, Green, Yellow, Blue Press PS to increase the program number. Press PT to decrease the program number. Press the colored buttons to perform specific tasks in the OSD menu or teletext mode. INDEX Press to display a table of the available teletext subjects (programmable in the teletext mode only).
English Description Icon Picture Mode PIC Press continuously to toggle through all the picture settings: Vivid, Soft, User, Standard. Favorite channel FAV. In ATV, press to select favorite channels and / to go to favorite channels. press In DTV, press to open favorite list menu and press / to select channels and press OK to go to favorite channels. Freeze FREEZE Sleep timer Aspect ratio SLEEP ASPECT Function Press to pause a video frame on-screen.
Inserting the Remote Control Batteries Open the battery compartment cover at the back of the remote control. 2 Insert the batteries paying attention to the polarity markings inside the battery compartment. 3 Replace the battery compartment cover. ES S PR ES S 1 PR English 1.
English CAUTION • If the remote control is not used for a long period, remove the batteries and store them properly. • Handle damaged or leaking batteries carefully, and wash hands with soap if they come in contact with leaked chemical fluids. • If your remote control has two batteries, do not mix new and old batteries, or the life of the new batteries will be shortened. Chemical fluids may leak from the old batteries. • Danger of explosion if battery is incorrectly replaced.
2 English 2.1 2.1.1 Setting up your TV Basic Connections Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV. 2 Insert the plug at the other end of the power cord into a power outlet. 2.1.2 Connecting an Antenna or Cable TV Connect one end of the VHF/UHF (Antenna) or CATV cable to TV/DTV jack on the rear of the TV. Antenna Ground Clamp Coaxial Cable Ground Note: • Images are for illustration only and may vary by model or region.
Connecting External Devices Connect external devices such as VCRs, STBs, DVD players, video game consoles, earphones, or a PC to the TV using the appropriate ports on the rear of the TV. 2.2.1 Connecting External Earphones Headphones Speakers (Built-in Amplifiers) Note: • External speakers or headphones are not included with the TV. • The internal TV speakers will not output sound when headphones are plugged in. • Use external speakers with built-in amplifiers only.
English 2.2.2 Connecting to AV Devices The following diagram illustrates how to connect the AV devices to your TV via HDMI (A), YPbPr/AUDIO (B), SCART (C), AV/SV (D) ports. A HDMI 4 or R VIDEO L PR PB or Y D SCART 2 AUDIO 3 SCART 1 2 C B HDMI IN 1 R-AUDIO-L VIDEO S-VIDEO or SCART Adapter (Optional) NO O VID SCART Cable (Optional) EO ID S.
English 2.2.3 Connecting a VCR/ STB/ DVD Player Using Component Video/Audio, Composite Video/Audio, or S-Video/Audio Connect the TV to a VCR/ STB/ DVD player using three different types of video/audio inputs.
Connecting a PC using VGA Connect the TV to your PC to use it as the monitor using the VGA port as shown. 1 2 Connect the VGA port of the TV to the VGA output of the PC. Connect the line out port of the PC to the PC Audio In port of your TV to listen to audio from the PC. VGA AUDIO IN PC VGA Cable (Optional) Audio Cable (Optional) 2.2.5 Connecting a PC using DVI Connect the TV to your PC to use it as the monitor using the DVI port as shown.
Connecting HDMI HDMI (High Definition Multimedia Interface) assures that the best video signal is always sent from source to the TV. Refer to the following illustration to connect a HDMI device to the TV. HDMI IN 1 2 3 HDMI 4 DVD Player HDMI Cable (Optional) Note: When the HDMI cable is connected, connecting the audio cable is not necessary. However, it is necessary to do so if a HDMI to DVI cable is connected. 2.2.7 Connecting USB Service port, for DTV F/W update only.
English 2.2.8 Connecting a VCR/ STB/ DVD Player using SCART Use the SCART ports to connect a TV, VCR, VCD, DVD player or video game console. You can choose to use a SCART cable or adapter for the connection depending on the ports available on your player. SCART 1 SCART 2 SCART Adapter (Optional) NO O /M -L O DI AU RO DE VI O DE VI S.
Using the TV 2.3.1 1 English 2.3 Press Turning the TV On and Off on the control panel or remote control. The power LED indicator on the TV changes from red to green, indicating that the TV is on. 2 Press again. The power LED changes from green to red, indicating that the TV is off. 2.3.2 Switching Source Signals Press INPUT on the control panel or remote control to select the incoming source signal. 2.3.
3 English Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu can be accessed conveniently through the buttons on the remote control. Before going into details of each OSD option, you may get acquainted with the placement of the OSD system: CURRENT MENU: Displays the title of the currently selected menu. MAIN MENU: Setup Displays a list of menu items.
English 3.1 OSD Setting Menus Follow the instructions indicated on the down side of the OSD Function Menu. Press PS/PTon the control panel or / to scroll through the menus, VOL + on the control panel or to select an item, or MENU to exit the OSD menu. The following menus can be set by different adjustment methods. 3.2 1 Adjusting Picture Settings Press MENU to enter the OSD Main Menu screen. The Picture menu is then displayed.
English 3.3 1 Adjusting Sound Settings Press MENU to enter the OSD Main Menu screen. 2 3 Press 4 Press 5 Press / settings. 6 7 Press MENU to return to the Sound menu. Press Sound Sound Mode Balance Treble Bass to select the Sound menu. to enter the Sound menu. / Standard 0 50 50 to select an item. adjust the scales or options Move Select Menu Return Press MENU to exit the OSD menu. - The Sound menu can be used to adjust the Sound Mode, Balance, Treble, and Bass settings.
Poland, Netherlands, and Other. / • The Channel can be used to select channels by pressing . • There are a variety of transmission standards of colour and audio signals used in worldwide TV systems. The Colour System and Sound System settings allow you to select standards suited for the area where you reside. • The Colour System can be set to AUTO, PAL, and SECAM. • The Sound System can be set to AUTO, BG, DK, I, L, and L’.
English - Just follow the instructions at the bottom of the Channel Editor screen to Skip, Delete, Swap, or Lock a channel. Channel Editor Channel Frequency 1 223.25 2 223.25 3 235.30 4 241.30 5 259.25 6 271.25 7 277.25 8 283.25 9 289.30 10 301.30 Skip Move Name --------------------- Del Rename Skip Off Off Off Off Off Off Off Off Off Off Fav. Swap Fav. Fav.
• Under the submenu of the Channel Management option, you can organize, sort, group, or delete TV channels. • The Area can be set to Germany, UK, Italy, Spain, Portugal, France, Hungary, Poland, Netherlands and Other. • Select Auto Search to activate the automatic TV and Radio channel search. Select Manual Search to look for the TV channels manually. Cannel Search S.No TV Channel Channel 35 UHF Progress Menu S.
English • The Subtitle Type provides you with Normal and Hearing Impaired options. • The Time selection includes GMT Offset and Summer Time. - Press / to adjust the GMT Offset to AUTO or a value ranging from +12 to -12. - Press / to adjust Summer Time to On or Off. Time GMT Offset Summer Time Move AUTO Off Select Menu Return • Select CI to access the Common Interface. DTV Time CI Parental Rating Move - Press Select Menu Return to enter the Common Interface menu.
1 English 3.6 Adjusting PC Settings Press INPUT and select PC as the signal type. 2 Press MENU to enter the OSD Main Menu screen. 3 4 Press 5 Press 6 Press / settings. 7 8 Press MENU to return to the PC menu. Press Pc Setup Auto Adjust H Position V Position Phase Clock to select the PC menu. Off 0 0 0 0 to enter the PC menu. / to select an item. Move Select Menu Return adjust the scales or options Press MENU to exit the OSD menu the OSD menu.
English 3.7 1 Adjusting Setup Settings Press MENU to enter the OSD Main Menu screen. 2 3 Press 4 5 Press 6 7 Press Setup Language TT Language SCART 1 SCART 2 HDMI Scan Info Aspect HDMI Audio X-Contrast to select the Setup menu. to enter the Setup menu. / to select an item. Press / to change the scales or options settings. Move English West AUTO AUTO AUTO Full HDMI Off Select Menu Return Press MENU to return to the Setup menu. Press MENU to exit the OSD menu.
Panorama. The following pictures are settings for HDMI/1080P, please see below for details. Type 4:3 16:9 Content AUTO Full Nomal Subtitle Zoom Panorama Note: The options available on the OSD menu may vary depending on the input signal source.
4 English Troubleshooting Situation Solution • • Connect the power cord properly. Check if the power LED is on or not. No picture and sound. • • • • Press on the control panel or remote control. Press Input to cycle through connected video sources. Press PS or PT to switch to other TV programs. Make sure all cables are connected properly. No picture, or poor picture, sound is OK. • • Check the antenna and cable connections. Adjust the Brightness in the Picture OSD menu. Picture is not in color.
Support Timing PC Mode Support Timing Mode Resolution (active dot) Horizontal Frequency (KHz) Vertical Frequency (Hz) Nominal Pixel Clock (MHz) PC (VGA) DVI to HDMI VGA 640x480@60Hz 31.469 59.940 25.175 V V SVGA 800x600@60Hz 37.879 60.317 40.0 V V XGA 1024x768@60Hz 48.363 60.004 65.000 V V VESA 1280x720@60Hz 44.955 59.94 74.176 V VESA 1280x960@60Hz 60.000 60.000 108.000 V SXGA 1280x1024@60Hz 63.981 60.020 108.000 V V WXGA+ 1440x900@60Hz 55.935 59.887 106.
6 English Specifications Screen Size 138,7 cm / 55” LCD Panel 1920x1080 Refresh Rate 100Hz Input Function RF in x 1 SCART x 2 AV x 1 Component Video RCA In x 1 Component Audio In x 1 HDMI x 4 VGA x 1 VGA Audio In x 1 CI x 1 S-Video x 1 Output Function Earphone Out Speaker 15W+15W Feature Full HD HD Ready 3D Combo Filter 3D De Interlacer Noise Reduction 3:2/2:2 Pull down X-Contrast (15000:1) 24p input 38
1 2 3 4 Dissembling the stand base Disconnect all the cables and cords from the TV to prevent breakage. Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. Remove the six (6) screws so that the stand base can be removed. Gently remove the stand base. ( For reference only ) Wall mounting the TV: 1 2 3 4 Purchase a VESA compatible wall bracket: VESA 400 X 400, 4 holes, M6, 20mm. Locate your ideal TV position on the wall.
8 English Using the Cable Organizer Route the cables through the cable clamp as shown: 40
