Operation Manual

ENGLISH
14
7 The channel scan may take a while to
complete. Once the automatic search
ends, the TV automatically switches to the
rstchannelfound.
Selecting Your Content Source
You can watch cable or broadcast TV, play DVD or connect to your PC.
To select the source signal:
Press • INPUT on the remote control. The Input Source menu
appears.
Press •
/ to highlight the desired source, then press OK to
conrm.
Performing an Automatic Channel Search
BeforeusingtheTVtoviewprograms,youneedtoactivatethechannelsearchrst.
1 Press MENU on the remote control or the control panel to display the main menu.
2 Select Channel ( ) > Auto Scan.
3 Press OK on the remote control to run the channel search.
Selecting Channels
Press • CHp or CHq on the remote control or
CH
or
CH
on the control panel to
increase / decrease the program number.
Press the numeric buttons on the remote control.•
Input Source
TV
AV1
AV2
YPbPr
PC
HDMI1
HDMI2
HDMI3
USB
Current Frequency
To tal Channels Found
Status
Progress
Press Return to skip DTV scan
DTV Scanning
69000000 Hz
0
Return
Installation Guide - Autoscan