Operation Manual

ENGLISH
12
2. Setting up your TV
Power Connection
1
Connect the power cord to the AC IN input jack on the rear of the TV.
2 Insert the plug at the other end of the power cord into a power outlet.
3 Press the AC power switch to turn on the power supply.
Rear Connections
See the illustration and table below for device connection instructions.
Connection Order
HDMI is the best way to connect a device. If
it is not available, move down the list in order
until you nd a connection that is available on
each device.
HDMI YPbPr
AV1/AV2
HDMI
YPbPr
AV IN2 / YPbPrAV IN2
Pr Pb Y L
_
Audio
_
R
Use HDMI to connect
external devices when
available. If not available,
use YPbPr.
AV IN2 / YPbPrAV IN2
YP bPr
HDMI
YPbPr
AV1/AV2
* Typical Layout
1
3
2
1
2
3
Use YPbPr
to connect
AV devices.
AV IN2 / YPbPrAV IN2
VIDEO
AUDIO
L
R
Use AV1/AV2 to connect
AV devices.
Antenna/Cable
Use this connection when you need to
connect directly to an antenna or cable
system instead of using a cable box.
Or
RF Coaxial Wire (75 Ω)
Cable TV
Antenna
Be careful not to bend the
copper wire.