Operation Manual

User’s Manual

display, which does not ensure the image is shown as is or in

initial scale.「FIT」indicates scaling by the proportion of original

images, which may cause the screen showing black bands. [The

availability of this function depends upon the selected model]

H-POSITION

Select the「H-POSITION」option to shift the screen image to the

left or right. Enter the option and adjust the level. [For VGA

only]

V-POSITION

Select the 「V-POSITION」option to shift the screen image up or

down. Enter the option and adjust the level. [For VGA only]

CLOCK

Select the 「CLOCK 」 option to reduce the vertical flicker of

characters on the screen. Enter the option and adjust the level.

[For VGA only]

PHASE

Select the「PHASE」option to reduce the horizontal flicker of

characters on the screen. Enter the option and adjust the level.

[For VGA only]

SHARPNESS

Select the「SHARPNESS」option to adjust the sharpness of the

display. Set the value from -2 to 2.

VIDEO MODE

Choose「VIDEO MODE」or 「PC MODE」for video

transmission. While using HDMI or HDMI to DVI ports for

video transmission, the video will appear cut off slightly around

the edge; choose「PC MODE」to view videos with complete

image. (VIDEO MODE only functions for inputs from HDMI or

DVI that supports HDCP video (YUV format))

OSD SETTING

LANGUAGE

Select 「LANGUAGE」 option to change the language of the

OSD. Enter the option and select a language. [Reference only,

the OSD Language depends on the selected model]

H-POSITION

Select「H-POSITION」option to adjust the horizontal position of

the OSD. Enter the option and adjust the level.

V-POSITION

Select 「V-POSITION」option to adjust the vertical position of

the OSD. Enter the option and adjust the level.

TRANSPARENCY

Select 「TRANSPARENCY」option to adjust the transparency of

the OSD. Enter the option and adjust the level.

OSD TIME-OUT

Select 「OSD TIME-OUT」option to set the OSD time out from

10 to 100 seconds. Enter the option and adjust the level.