06,7 cm (42.
Regulatory Information ................................................................ 3 Description of Warning Symbols .................................................. 3 Safety Notices ............................................................................. 4 Preface ....................................................................................... 6 Warranty and Service .................................................................. 6 1. Getting Started ....................................
English Table of Contents 2.3.5 Adjusting the Volume .............................................. 25 2.3.6 Editing the Favorite List .......................................... 26 2.3.7 Editing the Channel List .......................................... 26 3. Adjusting On-Screen Display (OSD) Settings .......................... 27 3.1 OSD Setting Menus ......................................................... 28 3.2 Adjusting Picture Settings ................................................ 28 3.
English Regulatory Information CE Conformity Statement This device is in conformity with the requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility and Directive 2006/95/EC on the harmonization of the laws of Member States relating to electrical equipment for use within certain voltage limits.
English Safety Notices Installation Safety Notes Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
English Notes: • • The LCD TV is for entertainment use only and visual display tasks are excluded. This device uses a VGA connector to connect to a PC. To reduce the influence of main frequency on the source signal, use a VGA monitor cable with ferrite shield. Personal Safety 1. To avoid overloading the power supply, never plug too many electrical devices into an outlet, power strip, or extension cable. 2. Dangerous high-voltage electric power components are located inside the TV.
English Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or operating your TV. To ensure the safe and correct installation and operations of the TV, it is important that the safety and operation instructions in this manual are followed.
English Copyright © Copyright 2010 Hannspree, Inc. All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or other third parties).
1 English 1.1 Getting Started Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • TV • User’s manual • Quick start guide • Warranty card • Power cord • Remote control and batteries • TV cleaning cloth • Rubber cover According to WEEE regulation, this TV can’t be handled as normal trash in Europe when it is out of usage.
Introducing the TV You can watch SECAM/ PAL/ DVB-T broadcast, cable, or digital television channels, and easily connect a VCR, STB or DVD player to the SCART, HDTV (Component), AV(Composite), and HDMI input ports (locations of these ports depend on the model). You can also use the TV as a monitor for your PC by connecting it through the VGA port.
English 1.4 Control Panel Description Button Power Function Press to turn the TV on or off. Input source INPUT Press to select the proper input source. Menu MENU Press to open the OSD menu. Program select P Press to increase the program number or move upward to the previous item on the OSD menu. Program select P Press to decrease the program number or move downward to the next item on the OSD menu. Volume adjust VOL + Press to increase the volume or move to the right on the OSD menu.
Connector Function SERVICE Service English Description Service only. Not available for users. S-VIDEO Connect to an external device, such as a VCR, STB, or a DVD player. Composite Input (Video) VIDEO Connect to an external device, such as a VCR, STB, or a DVD player. Composite Inputs (Audio) R-AUDIO-L Connect to an external device, such as a VCR, STB, or a DVD player. S-Video Input Connect to earphones or external speakers with a built-in amplifier.
English Description Connector SCART 2 SCART 2 IN VGA (PC) Input PC Audio Input VGA AUDIO IN HDMI 1 Input HDMI IN 1 HDMI 2 Input HDMI IN 2 HDMI 3 Input HDMI IN 3 Power Connector 1.6 Function Connect to an external device, such as a VCR, STB, or a DVD player with AV, SVideo, L/R IN. Connect to a PC’s VGA port. Connect to a PC’s line/audio port. Connect a HDMI equipment or a HDMIDVI adapter cable to devices such as a DVD player or set-top box.
Icon Last Function Use to select a program directly. Press 0-9 to enter the program numbers (press 1 and 0 for program 10). Keypad Pro.List English Description Pro.LIST LAST Press to display the program list. Press to return to the last channel selected. 1. Press to display current channel/program information. Information INFO Menu MENU OK OK 2. During DTV menu selection, press to display help information about Channel Organizer, Channel Sorting, Channel Grouping, Time and Parental Rating.
English Description Icon Press to change the multi sound selection of the TV channel. Dual sound Select program Function P /P Red, Green, Yellow, Blue Press PS to increase the program number. Press PT to decrease the program number. Press the colored buttons to perform specific tasks in the OSD menu or teletext mode. INDEX Press to display a table of the available teletext subjects (programmable in the teletext mode only).
English Description Icon Picture Mode PIC Press continuously to toggle through all the picture settings: Vivid, Standard, Movie, or User. Favorite channel FAV. Press to open favorite list menu and press / to select channels. Press OK to go to the selected channel. Freeze FREEZE Sleep timer Aspect ratio SLEEP ASPECT Function Press to pause a video frame on-screen. Press repeatedly to set the sleep timer (15, 30, 45, 60, 90 or 120 minutes). Cancel the timer by selecting the Sleep Off option.
English 1.7 1 Inserting the Remote Control Batteries Open the battery compartment cover at the back of the remote control (A). (A) 2 Insert the batteries paying attention to the polarity markings inside the battery compartment (B). (B) 3 Replace the battery compartment cover (C).
English CAUTION • If the remote control is not used for a long period, remove the batteries and store them properly. • Handle damaged or leaking batteries carefully, and wash hands with soap if they come in contact with leaked chemical fluids. • If your remote control has two batteries, do not mix new and old batteries, or the life of the new batteries will be shortened. Chemical fluids may leak from the old batteries. • Danger of explosion if battery is incorrectly replaced.
2 English 2.1 2.1.1 Setting up your TV Basic Connections Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV. 2 Insert the plug at the other end of the power cord into a power outlet. 2.1.2 Connecting an Antenna or Cable TV Connect one end of the VHF/UHF (Antenna) or CATV cable to TV/DTV jack on the rear of the TV. Antenna Ground Clamp Coaxial Cable Ground Note: • Images are for illustration only and may vary by model or region.
Connecting External Devices Connect external devices such as VCRs, STBs, DVD players, video game consoles, earphones, or a PC to the TV using the appropriate ports on the rear of the TV. 2.2.1 Connecting External Earphones Headphones Speakers (Built-in Amplifiers) Note: • External speakers or headphones are not included with the TV. • The internal TV speakers will not output sound when headphones are plugged in. • Use external speakers with built-in amplifiers only.
English 2.2.2 Connecting to AV Devices The following diagram illustrates how to connect the AV devices to your TV via HDMI (A), YPbPr/AUDIO (B), SCART (C), AV/SV (D) ports. A HDMI 4 AUDIO or R VIDEO L PR PB or Y D SCART 2 3 SCART 1 2 C B HDMI IN 1 or R-AUDIO-L VIDEO S-VIDEO SCART Adapter (Optional) EO ID S.
English 2.2.3 Connecting a VCR/ STB/ DVD Player Using Component Video/Audio, Composite Video/Audio, or S-Video/Audio Connect the TV to a VCR/ STB/ DVD player using three different types of video/audio inputs.
Connecting a PC using VGA Connect the TV to your PC to use it as the monitor using the VGA port as shown. 1 2 Connect the VGA port of the TV to the VGA output of the PC. Connect the line out port of the PC to the PC Audio In port of your TV to listen to audio from the PC. VGA AUDIO IN PC VGA Cable (Optional) Audio Cable (Optional) 2.2.5 Connecting a PC using DVI Connect the TV to your PC to use it as the monitor using the DVI port as shown.
Connecting HDMI HDMI (High Definition Multimedia Interface) assures that the best video signal is always sent from source to the TV. Refer to the following illustration to connect a HDMI device to the TV. HDMI IN 1 2 3 HDMI 4 DVD Player HDMI Cable (Optional) Note: When the HDMI cable is connected, connecting the audio cable is not necessary. However, it is necessary to do so if a HDMI to DVI cable is connected. 2.2.7 Connecting USB Service port, for DTV F/W update only.
English 2.2.8 Connecting a VCR/ STB/ DVD Player using SCART Use the SCART ports to connect a TV, VCR, VCD, DVD player or video game console. You can choose to use a SCART cable or adapter for the connection depending on the ports available on your player. SCART 1 SCART 2 SCART Adapter (Optional) NO O /M -L O DI AU RO DE VI O DE VI S.
Using the TV 2.3.1 1 English 2.3 Press Turning the TV On and Off on the control panel or remote control. The power LED indicator on the TV changes from red to green, indicating that the TV is on. 2 Press again. The power LED changes from green to red, indicating that the TV is off. 2.3.2 Switching Source Signals Press INPUT on the control panel or remote control to select the incoming source signal. 2.3.
English 3 Press MUTE to eliminate sounds, and press MUTE again or press the volume buttons to restore the default volume. 2.3.6 Editing the Favorite List 1 Press MENU on the control panel or remote control, then select to enter the Channel menu. 2 Select Favorite Lists and press OK to open the Favorite List. 3 Select the desired channel and press OK to check or uncheck the channel. 4 Press MENU to exit. 2.3.
Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu can be accessed through the buttons either on the control panel or the remote control. Before going to details of each OSD item, you may get acquainted with the placement of the OSD system: ADJUSTABLE ITEMS: Displays the settings/values of the adjustable options. MAIN MENU: Displays a list of menu items.
English 3.1 OSD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Menu. Press / on the remote control to scroll through the PS / PT on the control panel or menus. press INPUT / VOL+ on the control panel or OK on the remote control to select an item and then press MENU/ VOL- to exit the OSD menu. The following menus can be set by different adjustment methods. 3.2 1 2 3 Adjusting Picture Settings Press MENU to enter the OSD Main Menu screen.
1 2 3 English 3.3 Adjusting Audio Settings Press MENU to enter the OSD Main Menu screen. Press / on the remote control or PS / PT on the control panel to select Audio menu. Picture Balance Audio Effect Clock / Timer Channel Auto Volume Preferred Language Digital MTS Setup Press / OK on the remote control or INPUT / VOL+ on the control panel to enter the Audio menu. Audio Mode Equalizer Audio Audio Description Recall Move OK Select Menu Return 4 Press item.
English 3.4 1 2 3 Adjusting Clock and Timer Settings Press MENU to enter the OSD Main Menu screen. Press / on the remote control or PS / PT on the control panel to select Clock and Timer menu. Picture Sleep Timer Time Mode Audio Date Local Offset Clock / Timer Channel Setup Press / OK on the remote control or INPUT / VOL+ on the control panel to enter the Clock and Timer menu. Move OK Select Menu Return 4 Press item.
1 2 3 English 3.5 Adjusting Channel Settings Press MENU to enter the OSD Main Menu screen. Press / on the remote control or PS / PT on the control panel to select Channel menu. Picture Teletext Language Auto Scan Clock / Timer Channel Manual Scan Channel Edit Favorite Lists Setup Press / OK on the remote control or INPUT / VOL+ on the control panel to enter the Channel menu. Country Subtitle Audio Parental Control Move OK Select Menu Return 4 Press item.
English 3.6 1 2 3 Adjusting PC Setting Options Press MENU to enter the OSD Main Menu screen. Press / on the remote control or PS / PT on the control panel to select PC Setting menu. Picture H Position V Position Audio Phase Clock Clock / Timer Auto Adjust PC Setting Setup Press / OK on the remote control or INPUT / VOL+ on the control panel to enter the PC Setting menu. Move OK Select Menu Return 4 Press item.
1 2 3 English 3.7 Adjusting Setup Settings Press MENU to enter the OSD Main Menu screen. Press / on the remote control or PS / PT on the control panel to select Setup menu. Picture Common Interface SCART1 Clock / Timer Channel SCART2 Mode Setting Vivid Motion Setup Press / OK on the remote control or INPUT / VOL+ on the control panel to enter the Setup menu. OSD Language OSD Time Audio First Time Setup Recall Move OK Select Menu Return 4 Press item.
4 English Troubleshooting Situation Solution • • Connect the power cord properly. Check if the power LED is on or not. No picture and sound. • • • • Press on the control panel or remote control. Press Input to cycle through connected video sources. Press PS or PT to switch to other TV programs. Make sure all cables are connected properly. No picture, or poor picture, sound is OK. • • Check the antenna and cable connections. Adjust the Brightness in the Picture OSD menu. Picture is not in color.
Support Timing PC Mode Support Timing Mode Resolution (active dot) Horizontal Frequency (KHz) Vertical Frequency (Hz) Nominal Pixel Clock (MHz) PC (VGA) DVI to HDMI VGA 640x480@60Hz 31.469 59.941 25.175 V V SVGA 800x600@60Hz 37.879 60.317 40 V V XGA 1024x768@60Hz 48.363 60.004 65 V V VESA 1280x720@60Hz 44.955 59.94 74.25 V V VESA 1280x960@60Hz 60 60 108 V V SXGA 1280x1024@60Hz 63.981 60.02 108 V V WXGA+ 1440x900@60Hz 55.935 59.887 106.
6 English Specifications Screen Size 106,7 cm / 42.
Setting the TV on the Wall Dissembling the stand base: 1 2 VIDEO 2 S-VIDEO 2 USB 3 4 5 Disconnect all the cables and cords from the TV to prevent breakage. Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. Remove the six (6) screws so that the stand base can be removed. Gently remove the stand base. Please add rubber cover when this TV is mounted on the wall.
8 English Using the Cable Organizer Route the cables through the cable clamp as shown: f 38
