Specifications

ENGLISH
13
7 Once the automatic search ends, select
your location.
Note:
In Home mode, TV will be powered off •
automatically if there is no operations in 4 hours.
8 Press OK when initial setup is
completed.
Selecting Your Content Source
You can watch cable or broadcast TV, play DVD or connect to your
PC.
To select the source signal:
Press • Source on the remote control. The Input Source menu
appears.
Press • p/q to highlight the desired source, then press OK to
conrm.
Performing an Automatic Channel Search
BeforeusingtheTVtoviewprograms,youneedtoactivatethechannelsearchrst.
1 Press MENU on the control panel or press Menu on the remote control to enter the TV
menu.
2 Select Tuner mode.
3 Select Channel install > Automatic search.
4 Select Country and press OK.
5 Select the signal type.
6 Press OK/u on the remote control to run the channel search.
Selecting Channels
Press • P or P on the remote control or the control panel to increase / decrease the
program number.
Press the numeric buttons on the remote control.•
Initial Setup Location
Please select your location:
Home
Shop
Back Next Exit
Exit
Select
Initial Setup Complete
Back
Congratulations !!
Completed Initial Setup.
Please press [OK] to exit.
Source
TV
CMP
AV
VGA
HDMI1
HDMI2
HDMI3
No label
No label
No label
No label
No label
No label