Specifications

ENGLISH
26
PVR (Personal Video Record)
This function allows you to record your favorite TV program to a USB device.
1 Plug a USB device to the USB connector on the TV.
2 Press Option on the remote control and select Quick
access > PVR.
3 Press OK/u to enter.
4 Press the red button to start recording. A PVR mini panel
appears on the screen to indicate the recording progress.
n
Use p/q/t/u to adjust the recording duration.
n
Press the green button to stop recording manually. Otherwise, the recording will stop
automatically when the recording duration is complete.
n
TherecordedleissavedintoaPVRfolderinMedia Center > Video > pvr.
5 To watch the recorded program, exit the PVRmoderstandswitchtoUSB mode. Go to
Media Center > VideoandselectthedesiredrecordedleinthePVRfolder.PressOK to
play.
Notes:
When CI+ card is used, this function will be disabled. •
This function is only available for digital channels.•
This function only supports USB device of FAT32 format.•
Before you plug the USB device to the TV, make sure that you have backed up the data in the device to avoid •
unusual performances that might cause data lost.
The bigger storage size of the USB device for PVR function, the longer you can record the program.•
If you want to switch the channel or signal source during recording, it will prompt you whether to stop recording, •
select OK if you want to save the recorded data. Then switch to a new channel or signal source.
TheTVcannotplaylesnormallyiftheleparametersexceedthesystemlimitations,theleformatisnot•
supported,theleisdamaged,orthelecannotbedecoded.
DonotunplugtheUSBdevicewhenthesystemisrecordingdataorreadingale.Thismaycausesystemor•
device malfunction.
Quick Access
Picture Preset
Sound Preset
Time shift
PVR
Schedule List
USB