User manual

User’s Manual
Key Lock
Allow to select the key lock: On, Off.
On / Off
Reset
Allow you to restore the factory settings.
Sofeware
Update(USB)
Allow you to update software using USB.
SCREEN
Item Function Operation Range
Auto Adjust
Press ▼ / ▲ button to select Auto Adjust, then press
OK button to auto adjust
Horizontal Pos.
Press ▼ / ▲ button to select Horizontal Pos., then
press OK button to enter sub-menu. Press ◄ / ►
button to adjust the horizontal position of image.
0~100
Vertical Pos.
Press ▼ / ▲ button to select Vertical Pos., then
press OK button to enter sub-menu. Press ◄ / ►
button to adjust the vertical position of image.
0~100
Clock
Press ▼ / ▲ button to select Clock, then press OK button
to enter sub-menu. Press ◄ / ►
button to adjust the clock.
0~100
Phase
Press ▼ / ▲ button to select Phase, then press OK
button to enter sub-menu. Press ◄ / ► button to
adjust the phase.
Press▲or▼to highlight
an item, press OK or ►
button to enter submen.
0~100
PLUG AND PLAY
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD.
It allows the monitor to inform the host system of its identity and, depending on the level of DDC
used, communicate additional information about its display capabilities. The DDC2B is a
bidirectional data channel based on the I²C protocol. The host can request EDID information over the
DDC2B channel.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE
MUST BE A VIDEO INPUT SIGNAL.
16