User manual

User’s Manual
HOW TO ADJUST A SETTINGS
PICTURE
Picture Mode Standard
50Contrast
Brightness 50
Color 50
Tint 50
Sharpness 50
Color Temperature Normal
Noise Reduction Middle
Move ExitMenu
Select
OK
Press ''MENU'' key on the remote control or on the control
panel, then the monitor will display the main menu.
1. Press "◄ / ►" key on the remote control or '' ▲/▼ ''
key on the control panel to select the adjustment sort menu,
which includes 4 sorts: SCREEN,PICTURE, SOUND,
TIME, OPTION.
2. Press "▲/▼" key on the remote control or '' ▲/▼ '' key on
the control panel to select what is needed to adjust in sort
menu.
3. Press "◄/►" key on the remote control or '' Vol+/Vol- '' key on the control panel to adjust the
value or setting.
4. When the main menu appears on the screen, press "MENU" key to exit; when submenu appears
on the screen, press "Exit " key to return to previous menu; press "SOURCE " key to show the signal
source selection menu, and press it again to exit from the menu.
5. In the process of menu operation, the unavailable options in current state will be in gray.
Note: "◄","►","▲" and "▼"in this Manual stand for the direction cursor keys on the remote
control unless specifically defined. The operating instructions in the text below are all based on keys
on the remote control. Please understand the keys on the panel by yourself.
PICTURE
Item Function Operation Range
Picture mode
Select your viewing preference from 4
options.(TIPS: You can press PMODE button to
change the Picture Mode directly.)
• Dynamic
• Standard
• Mild
• User
Contrast
Adjust the highlight intensity of the picture, but the
shadow of the picture is invariable.
0-100
Brightness
Adjust the visual perception output of the entire
picture,it will effect the liuminousness of the
picture.
0-100
Color
Control the colour. 0-100
Sharpness
Increase this setting to see crisp edges in the
picture; decrease it for soft edges.
0-100
Color
Temperature
Cycle among color temperature display modes:
Cool/Medium/Warm.
• Cool
• Medium
• Warm
Noise Reduction
Enter the Noise Reduction to
select :Off/Low/Middle/High.
Press▲ or ▼to highlight
an item, press OK or ►
button to enter submen.
• Off
• Low
• Middle
• High
14