User manual

User’s Manual

REMOTE CONTROL

Installing battery

Remove the battery cover, and insert two AAA (1.5V) batteries; make sure that the polarity of the

battery is consistent with the marks "+/-" in the battery slot.

Precautions of remote control usage

z Point the remote control to the receiver window. The objects between remote control and the

receiver window may disturb the normal operation.

z Keep the remote control away from strong vibration. In addition, do not set or put the remote

control in direct sunshine, which may result in deformation of the remote control.

z The remote control may be invalid if the receiver window is in direct sunshine or strong light; in

this case, please adjust the angle of the light or the device, or approach the remote control to the

receiver window.

z The effective range of the remote control may be affected if the battery voltage is low; in this

case, please replace with a new battery; if the remote control won't be used or battery voltage is

too low, please take out the battery to avoid corrosion due to battery liquid leakage.

z Do not mix different types of batteries, or used and new batteries.

z Do not throw the batteries into fire, charge or break up, or charge, short circuit, disassemble,

heat or burn the used batteries. Please follow the environmental protection regulations to

disposal of the batteries.

Remote Control Key Instruction

Key Function

Power

mute

Source

Vo l u m e

Cursor Key

POWER( ) Switch between normal working and

standby

MUTE( ) Turn off the sound

▲/▼/ W/X

▲/▼: select functions; W/X: adjust the

analog value

VOL+/VOL

Turn up/down the volume

MENU Press this key to call out the main menu

SOURCE Press this key to display signal source

selection menu

/ select functions