User’s Manual TABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 5 PRECAUTIONS................................................................................................. 5 SPECIAL NOTES ON LCD MONITORS ...................................................... 6 BEFORE YOU OPERATE THE MONITOR ...................................................... 7 FEATURES......................................................................
User’s Manual Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
User’s Manual RECYCLING INFORMATION We, the HANNspree care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned substances.
User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. 4.
User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the • • • • Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.
User’s Manual BEFORE YOU OPERATE THE MONITOR FEATURES 80,0cm / 31.
User’s Manual INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly. 4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base. REMOVAL: 1.
User’s Manual SETTING THE MONITOR ON THE WALL DISSEMBLING THE STAND BASE: 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor. 3. Remove the screws so that the stand base can be removed. 4. Gently remove the stand base. (For reference only) WALL MOUNTING THE MONITOR: 1. Purchase a VESA compatible wall bracket: VESA 100×100, 4 holes, M4, 10mm, 8kg. 2.
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below.
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the Signal cable from the monitor to the VGA card. • Press the power button to turn on the monitor. The power indicator will light up.
User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Blue — Power On mode. Red — Power Saving/Off mode. • MENU / RETURN: Turn the OSD menu on/off or return to the previous menu. • Adjust + / - : Adjust Audio volume when the OSD is off. • Adjust ▲▼ : Navigate through adjustment icons when OSD is ON or adjust a function when function is activated. •【SOURCE】Button: 1. Press【SOURCE】to enter Source selections.
User’s Manual REMOTE CONTROL Installing battery Remove the battery cover, and insert two AAA (1.5V) batteries; make sure that the polarity of the battery is consistent with the marks "+/-" in the battery slot. Precautions of remote control usage z Point the remote control to the receiver window. The objects between remote control and the receiver window may disturb the normal operation. z Keep the remote control away from strong vibration.
User’s Manual HOW TO ADJUST A SETTINGS Press ''MENU'' key on the remote control or on the control Picture Mode Standard panel, then the monitor will display the main menu. Contrast 50 1. Press "◄ / ►" key on the remote control or '' ▲/▼ '' Brightness 50 PICTURE Color 50 key on the control panel to select the adjustment sort menu, Tint 50 which includes 4 sorts: SCREEN,PICTURE, SOUND, Sharpness 50 Color Temperature Normal TIME, OPTION. Noise Reduction Middle 2.
User’s Manual SOUND Operation Range Item Function Sound mode Selects a sound type when viewing programs or videos that support multiple sounds. *TIPS: You can press SMODE button on the remote control to change the Sound Mode directly. Treble Press▲ or ▼to highlight Increase or decrease the level of the higher-pitched 0~100 an item, press OK or ► sounds. Bass Increase or decrease the level of the lower-pitched sounds. Balance Adjust the audio output between the left and the right speakers.
User’s Manual Key Lock Allow to select the key lock: On, Off. Reset Allow you to restore the factory settings. Sofeware Update(USB) Allow you to update software using USB. On / Off SCREEN Item Function Operation Auto Adjust Press ▼ / ▲ button to select Auto Adjust, then press OK button to auto adjust Horizontal Pos. Press ▼ / ▲ button to select Horizontal Pos., then press OK button to enter sub-menu. Press ◄ / ► button to adjust the horizontal position of image.
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS Problem Reason Solution screen display, no sound, indicator is off. Power plug is loose, or power supply isn't connected. 1. Saturation is too low. 2. Color system is improper. 1. Volume is too low. 2. Sound is turned off. 3. Sound system is improper. Check if the power cord is connected properly. Image has no color. Monitor doesn't have sound. PC doesn't have display, no signal input.
User’s Manual Addendum related to Windows 7/ Windows 8 When you encounter display problem under Windows 7/ Windows 8, you need to do the following: 1. Make sure your PC computer (Hardware requirement) can support Windows 7/ Windows 8. 2. Make sure your video card can run Windows 7/ Windows 8. 3. If your video card can support Windows 7/ Windows 8, need to install the latest Windows 7/ Windows 8 driver of your video card. Suggest to do the following: 1.
User’s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, if the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT: Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.
User’s Manual 9 1920×1080p@50Hz 10 1920×1080p@60Hz ** We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee the image quality.
User’s Manual APPENDIX SPECIFICATIONS LCD Panel Video Driving system TFT Color LCD Size 80cm / 31.5” Diagonal Pixel pitch 0.121mm(H) × 0.364mm(V) H-Frequency 30KHz – 82KHz V-Frequency 55Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1920 × 1080 @60Hz Plug & Play VESA DDC2BTM Power consumption ON Mode 50W (Typical) Power Saving Mode ≤0.5W OFF Mode ≤0.5W Audio output Rated Power 6Wx2 rms (Per channel) Input Terminal VGA HDMI PC Audio IN USB Maximum Screen Size Hor. : 376.
