Datasheet

54
4
English
Technical Inform ation
4.1 Troubleshooting
No picture and
sound.
• Connect the power cord properly.
• Press the POWER key on the control panel or
remote control.
• Press the SOURCE key to cycle through
connected video sources.
• Press CH UP or CH DOWN to switch to other
TV stations.
• Check the TV/CATV OSD settings.
• Make sure all cables are connected properly.
No picture, or poor
picture, but sound
is OK.
• Check the antenna and cable connections.
• Adjust the brightness in the OSD menus.
• Make sure the video signal cable is
connected properly.
Picture is not in
color.
• Adjust the saturation in the OSD menus.
• Make sure all cables are connected properly.
Picture is OK, but
no sound.
• Press the VOL UP or VOL DOWN key on the
control panel or the remote control.
• Make sure the MTS option is set to MAIN or
MONO.
• Make sure the source device is functioning
properly.
• Set the volume to a higher level.
• Make sure the audio cable is connected
securely.
• Turn the mute off.
Technical Information
generic_T6_T6.book Page 54 Monday, November 28, 2005 11:22 AM