Datasheet

36
English
Troubleshooting
No power
• Make sure the TV and the power cord are connected correctly
• Check if you pressed POWER on the remote control unit .If the
indicator in the front panel is red ,press POWER in the remote con-
trol or the front panel .
LCD TV does not operate
• External inuences such as lightning or static electricity may cause
improper operation. In this case, operate the unit after rst turning
on the power ,or un-plugging the AC cord and plugging it in again
after 1 to 2 minutes.
Power is cut off suddenly
• Check out of the off timer or sleep timer are set .
• The unit’s internal temperature has increased. Remove any objects
blocking the vents and clean them to remove dust .
Remote control unit does not operate
• Check if the batteries are inserted with the polarity(+,-)correctly
aligned .
• Check if the batteries are discharged .Please replace with new bat-
teries .
• Make sure that you did not use the remote control under strong or
uorescent lighting .
• Check if there is a fluorescent light illuminated near the remote
control sensor .
• The path of the remote control beam may be blocked ;please make
sure the path is clear and that remote control is aimed at the re-
mote control sensor in the TV .
Picture is cut off /with side bar screen
• Check if the image position is correct .
• Check if the screen mode adjustments such as picture size are
made correctly.
Strange colour ,light colour ,or colour misalignment
• Is the room too bright ?The picture may look dark in a room that
is too bright .
• Check the input signal setting.