User Guide

P.2
Set to Buzzer
Set to Radio
Alarm OFF
(no indicator)
Step 2
Press and release the ALM1 Button
(or
ALM2 Button) repeatedly as needed to
cycle to desired alarm mode: Buzzer(default),
Radio(last station played) or
OFF(alarm is no longer active).
Step 4
Press the HR Button on top of unit
to adjust the HOUR.
NOTE: The PM indicator will light when
the hour is set for PM. There is no AM indicator.
Step 3
Press and hold the ALM1
Button
(or
ALM2 Button) on top of unit and
release once the display and buzzer
alarm indicator blink.
Step 1
Make sure unit is OFF(Clock Mode).
To confirm unit is off, press and hold the
ALM OFF/SOURCE Button on top right of
unit once or twice until OFF appears in display.
Note: To Reset a sounding alarm (to turn it off and have it come on the next day),
press the ALM OFF/SOURCE Button.
Step 6
Press the ALM1 (or ALM2) Button
to complete setting the alarm time.
Step 5
Press the MIN Button on top of unit
to adjust the MINUTE.
Cancel an alarm setting: Set the alarm mode to OFF by following steps 1 & 2 above.
ALARM SETTING
HX-100 QUICK START GUIDE