Instruction Manual
RADIO OPERATION
1. Press POWER/OFF/FUNC. button to select the FM Radio.
2. MANUAL TUNNING: Press the TIME+/SKIP+/TU+ button or TIME- /SKIP-/TU- button step
by step to tune to the desired radio stations.
3. DIGITAL TUNNING: Press and hold the TIME+/SKIP+/TU+ button or TIME- /SKIP-/TU-
button to search the next radio station in the direction of the search. The search operation
finds stations with strong signals, Stations with weak signal can only tuned manually.
4. Use the VOL+ or VOL- knob to adjust the volume to the desired listening level.
5. To turn off the radio, press and hold POWER/OFF/FUNC. button to go to Clock mode.
Note: For better FM reception, please fully extend the FM antenna located at the back of the
unit and rotate to obtain the best possible station reception. .
SAVING RADIO STATIONS IN THE MEMORY
Note : If you use this unit in the first time, or after plug off the power cord from a wall outlet, the
unit memory number will be starting from “P01”.
1. Tune to the desired FM radio station.
2. Press the TIME/P-MODE/PRO./MEM/10+ button, the display will show the memory station
number and “P01‘’ flash continuously.
3. Press TIME/P-MODE/PRO./MEM/10+ button again to store the station into the memory.
4. Repeat step 2 to 3 to store more radio stations in the memory.
5. Up to 10 FM radio stations can be stored in the memory.
TO LISTEN A STORED RADIO STATION IN THE MEMORY
Press the STOP/M+ button to skip to the next stored radio station.
BLUETOOTH OPERATION
Connecting BLUETOOTH
1. Press POWER/OFF/FUNC. button to select the BLUETOOTH mode,‘ bt‘ will show in the
display.
2. Turn on the Bluetooth of your device and search the unit for connection. Your Bluetooth
device should find “HX-1082BT HANNLOMAX”. If password is needed for connection,
please enter “0000”.
3. If connection is successful, your Bluetooth device may show Bluetooth is connected.
4. Select and play the audio files though your Bluetooth device.
5. You can use the TIME+/SKIP+/TU+ button to go to the next track or press the
TIME- /SKIP-/TU- button to go back to the previous track.
6. Press the PLAY/PAUSE/PAIR button to pause playing. To resume, press the
PLAY/PAUSE/PAIR button again.
To Unpair the Bluetooth connection
Press and hold PLAY/PAUSE/PAIR button to unpair the Bluetooth connection.
The CD Micro system will search for a new pairing.
Turn Off the Bluetooth Operation
To turn off the Bluetooth, press and hold POWER/OFF/FUNC. button to go to Clock mode.
-5-
CD OPERATION
1. Press POWER/OFF/FUNC. Button to select the CD mode
2. Insert an audio CD disc (CD/CDR /CDRW) in the CD compartment and close the CD door,
the unit will start reading the disc and play automatically.
3. During playing, press the PLAY/PAUSE/PAIR button to temporarily pause playing. To
resume, press the PLAY/PAUSE/PAIR button again.
4. To stop playing the disc, simply press the STOP/M+ button
5. To turn off the CD mode, press and hold POWER/OFF/FUNC. button to go to Clock mode.
CD Programming
The CD programming can only be done in STOP/M+ mode
1. Press the TIME/P-MODE/PRO./MEM/+10 button, the LCD display will show “P01”.
2. Use the TIME+/SKIP+/TU+ button or TIME- /SKIP-/TU- button to select the desired track.
3. Press the TIME/P-MODE/PRO./MEM/+10 button again to store the selected track in the
memory, the LCD display will show “P02”.
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the
memory.
5. Press the PLAY/PAUSE button to start playing the disc in the programmed order.
6. To stop playing, press the STOP/M+ button.
7. To cancel the programming list, press the STOP/M+ button again or open the CD door.
PLAYING MP3 FILES WITH USB DEVICE
1. Press POWER/OFF/FUNC. Button to select the USB mode.
2. Plug your USB device into the correct USB port on the unit, it will start reading the files in
the USB device and will play the tracks automatically.
3. To pause playing the MP3 files, press the PLAY/PAUSE/PAIR button. To resume playing
the MP3 files, press PLAY/PAUSE/PAIR button again. .
4. Use the VOL+ or VOL- knob to adjust the volume to the desired listening level.
5. Press and hold TIME/P-MODE/PRO./MEM/+10 button to skip 10 tracks.
6. To stop playing the MP3 files, press the STOP/M+ button.
7. To turn off the USB mode, press and hold POWER/OFF/FUNC. button to go to Clock
mode.
-6-