Instruction Manual

LOCATION OF CONTROLS
1. POWER/OFF/FUNC. button 11. USB Charging port (2.4A)
2.
TIME/P-MODE/PRO./MEM/+10
button
12.
USB Port for MP3 playback and
Charging (1A)
3 VOL+ button 13. Remote Sensor
4. VOL- button 14. CD Door
5. Play/Pause/PAIR button 15. CD Door Open Button
6. STOP/M+ button 16. Right Speaker Jack (R)
7. TIME+/SKIP+/TU+ button 17. Left Speaker Jack (L)
8. TIME- /SKIP-/TU- button 18. Aux-in Jack
9. LCD display 19. AC Power Cord
10. Speakers 20 FM Antenna
SPECIFICATIONS
Frequency Range: FM 88 - 108 MHz
Power Supply: AC 120V ~ 60 Hz
USB Rated Output: DC5V 1A
DC 5V 2.4A
Specifications are subject to change without further notice.
-3-
CONNECTING THE LOUDSPEAKERS
Connect the cables of the two loudspeakers to the corresponding input (R) for the right speaker
and input (L) for the left speaker, located at the back of the unit.
ATTEMNTION:
 Connect the loudspeakers before powering the unit:
 The unit may not work properly or get damaged if you use speakers different than the ones
supplied with the unit.
AC OPERATION
Connect the AC Power cord to a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands;
2. When planning not to use this unit for a long time, disconnect the power cable from the wall
outlet;
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to
avoid shock risks caused by damaged cable.
SETTING THE CLOCK
1. Press TIME/P-MODE/PRO./MEM/10+ button to set the time. The HOUR digit will begin to
flash on the display.
2. Press TIME+/SKIP+/TU+ button or TIME- /SKIP-/TU- button to adjust the HOUR. Press
TIME/P-MODE/PRO./MEM/10+ button to confirm HOUR.
3. The MINUTE digit will begin to flash on the display. Press TIME+/SKIP+/TU+ button or
TIME- /SKIP-/TU- button to adjust the MINUTE. Press TIME/P-MODE/PRO./MEM/10+
button to confirm MINUTE.
USB CHARGE YOUR DEVICES (2.4A and 1A)
Connect the standard size end of a USB cable (not included) to the USB ports on the unit and
connect the other end to the charging port of your devices.
The unit contains two USB ports (2.4A and 1A).
Remarks: Some devices may not support USB charging or
may require a higher power rating than this product provides.
Observe the charging status on your device. Ensure your
device is working properly before attempting to charge.
Charging function may not be supported for all phones or
electronic devices
-4-