User Guide

PRIMO 4

Microprocessor

Conductivity Meter

with Automatic Temperature

Compensation

PRIMO 4

Microprocessor

Conductivity Meter

with Automatic Temperature

Compensation

SPECIFICATIONS:

RANGE 0.00 to 10.00 mS/cm

RESOLUTION 0.01 mS/cm

ACCURACY

(@25°C/77°F) ±2% f.s.

TYPICAL EMC DEVIATION ±1% f.s.

TEMPERATURE Automatic from

COMPENSATION

0 to 60°C (32 to 140°F)

with ß=2%/°C

PROBE with 1m cable

ENVIRONMENT 0 to 50°C (32 to 122°F);

95% RH

BATTERY TYPE 2x1.5V alkaline (included)

BATTERY LIFE approx. 200 hours

of continuous use

DIMENSIONS 66x50x25 mm (2.6x2.2x1")

(meter only)

WEIGHT 80g (2.9oz)

ACCESSORIES:

HI 70039M 5000 µS/cm (5.00 mS/cm)

calibration solution (230mL bottle)

HI 70039P 5000 µS/cm (5.00 mS/cm)

calibration kit (25x20mL sachets)

This instrument is in compliance with the CE

directives.

http://www.hannainst.com

ISPRIMO4 09/00

PAGE 1
PRIMO 4 PRIMO 4 Microprocessor Conductivity Meter Microprocessor Conductivity Meter with Automatic Temperature Compensation with Automatic Temperature Compensation SPECIFICATIONS: RANGE 0.00 to 10.00 mS/cm RESOLUTION 0.01 mS/cm ACCURACY (@25°C/77°F) ±2% f.s. TYPICAL EMC DEVIATION ±1% f.s. TEMPERATURE Automatic from COMPENSATION 0 to 60°C (32 to 140°F) with ß=2%/°C PROBE with 1m cable ENVIRONMENT 0 to 50°C (32 to 122°F); 95% RH BATTERY TYPE 2x1.5V alkaline (included) BATTERY LIFE approx.
PAGE 2
• Once the display stops blinking, the meter is calibrated and ready for use. ON/OFF SWITCH LIQUID CRYSTAL DISPLAY 1888 + - BATTERY COVER BATTERIES BATTERIES REPLACEMENT: The symbol "Eb" on the LCD warns the user when the batteries have to be replaced. FRONT REAR Open the compartment and replace the two 1.5V batteries while paying attention to their polarity. MIN MAX MAXIMUM IMERSION LEVEL MINIMUM IMERSION LEVEL OPERATION: • Turn the meter on by pressing the ON/OFF button.