User Guide

PRELIMINARY EXAMINATION

Remove the instrument from the packing material and exam-

ine it carefully to make sure that no damage has occurred

during shipping. If there is any noticeable damage, notify

your Dealer immediately.

Each titrator is supplied complete with HI 710005 or HI

710006 12VDC power adapter.

PL 100C and PL 101C are also supplied with:

• HI 3500A-1 10mL burette

• HI 3500B reagent container

• HI 3500C rubber bulb

• 50mm (2”) long (dia. 7 mm/0.3”) magnetic stir bar

• HI 3132B glass-body platinum-platinum electrode with

1 m (3.3”) cable and BNC connector

• HI 76405 electrode holder

• small spoon

• graph paper

• recorder plug

Note Save all packing materials until you are sure that the instru-

ment functions correctly. Any damaged or defective items must

be returned in their original packing materials together with

the supplied accessories.

Safety Precautions Please take the time to read the safety precautions carefully

wherever they appear in this manual. They are provided to

prevent personal injury and damage to the instrument. This

safety information applies to the operators and service per-

sonnel and the following two captions are used:

CAUTION: identifies conditions or practices that could re-

sult in damage to the instrument or persons;

WARNING: identifies conditions or practices that could re-

sult in personal injury or loss of life.

Note Because of the inherent dangers in handling chemical

samples, standards and reagents, HANNA Instruments

strongly recommends the user of this product to review the

Material Safety Data Sheets and become familiar with safe

handling procedures and proper usage prior to handling

any chemicals.