User Guide

101100
ACCESSORIES
pH CALIBRATION SOLUTIONS
HI774P pH 4.01 & 7.01 Buffer Solution,
30 mL each
HI7004M pH 4.01 Buffer Solution, 230 mL
HI7004L pH 4.01 Buffer Solution, 460 mL
HI7006M pH 6.86 Buffer Solution, 230 mL
HI7006L pH 6.86 Buffer Solution, 460 mL
HI777P pH 7.01 Buffer Sol. 2x30 mL
HI7007M pH 7.01 Buffer Solution, 230 mL
HI7007L pH 7.01 Buffer Solution, 460 mL
HI7009M pH 9.18 Buffer Solution, 230 mL
HI7009L pH 9.18 Buffer Solution, 460 mL
HI7710P pH 7.01 & 10.01 Buffer Solution,
30 mL each
HI7010M pH 10.01 Buffer Solution, 230 mL
HI7010L pH 10.01 Buffer Sol., 460 mL
pH CALIBRATION SOLUTIONS IN FDA
APPROVED BOTTLE
HI8004L pH 4.01 Buffer Solution, 460 mL
HI8006L pH 6.86 Buffer Solution, 460 mL
HI8007L pH 7.01 Buffer Solution, 460 mL
HI8009L pH 9.18 Buffer Solution, 460 mL
HI8010L pH 10.01 Buffer Solution, 460 mL
ELECTRODE STORAGE SOLUTIONS
HI70300M Storage Solution, 230 mL
HI70300L Storage Solution, 460 mL
ELECTRODE STORAGE SOLUTIONS IN
FDA APPROVED BOTTLE
HI80300M Storage Solution, 230 mL
HI80300L Storage Solution, 460 mL
ELECTRODE CLEANING SOLUTIONS
HI7061M General Cleaning Sol., 230 mL
DA? Requests the meter to send the date
status (MMDD)
TI? Requests the meter to send the time
status (HHMM)
Commands setting parameters:
/BR To set the RS232 baud rate. E.g.
send "/BR0" to set the meter to baud rate of
150
send "/BR1" to set the meter to baud rate of
300
send "/BR2" to set the meter to baud rate of
600
send "/BR3" to set the meter to baud rate of
1200
send "/BR4" to set the meter to baud rate of
2400
send "/BR5" to set the meter to baud rate of
4800
send "/BR6" to set the meter to baud rate of
9600
/PF To set the RS232 command prefix.
E.g. send "/PF05" to set the command
prefix to 05.
For all models
Note: <ACK> will be sent by the meter if the
command received is accepted, other-
wise it will send <CAN>.
<ACK> equals to ASCII code 06 and
<CAN> equals to ASCII code 24.
These commands may be sent with either
capital or small letters. Invalid commands will
be ignored. The characters sent by the pH
meter are always capital letters.