User Guide

7574
• "P5." will be displayed on the
secondary LCD.
• To set the time interval (choice #2), press
2 followed by ENTER.
"P5.2" will be displayed on the second-
ary LCD with "0" on the primary one.
The minimum time interval is 1 minute.
The interval is expressed in HH:MM.
E.g printing interval of 1 hour and 30
minutes.
The printer will print the value.
• "P5." will be displayed on the
secondary LCD.
2
ENTER/
1
. 3
ENTER/
PROGRAM 5
1 enter start
time
2 enter time in-
terval
3 enter end
pH/mV value
Start time
10.30
Time Interval
1.30
The printout defines functions 1, 2 and 3:
1 is a start time,
2 is the time interval,
3 is the interrupt value of pH/mV.
• To set the start time (choice #1), press 1
followed by ENTER. "P5.1" will be dis-
played on the secondary LCD with "0" on
the primary one.
• Enter the desired number followed by EN-
TER. E.g. Starting time 10:30.
Hours and minutes must be separated by
a decimal point.
The printer will print the value.
PROGRAM 5
1 enter start
time
2 enter time in-
terval
3 enter end
pH/mV value
0
ENTER/
PROGRAM 5
1 enter start
time
2 enter time in-
terval
3 enter end
pH/mV value
Start time
10.30
1 .
0
3
1
ENTER/