User Guide

5958
when this happens the
LCD will show page "0",
indicating the overwrit-
ing has happened.
Each time a new logging period starts, it
automatically starts a new page.
When the samples collected for a single lot
are more than the limit (8000 samples) the
meter will automatically stop logging.
TO CLEAR LOGGED DATA
The entire logged data can be cleared by
pressing LOG as soon as the meter is
turned on (i.e. by pressing ON and LOG
simultaneously).
The choice has to be confirmed
by pressing CFM.
The next logging will
start from page 16.
CFM
BUF
CFM
ON
LOG
Press LOG and the primary LCD will show
the current lot number and the secondary
LCD will display the current page number.
Press LOG again to display the current sample
number (the number of values that have been
taken in the current lot).
TO STOP LOGGING
To stop logging press
LOG and then CAL.
Press LOG to display the next lot number.
Note: if OFF is pressed while
logging, the meter will stop
the logging and then turn
off.
MEMORY ORGANIZATION
The memory used for storing the logged data
is divided into 16 pages. The capacity of
each page is 500 samples. It starts to log
from page 16 downwards until 1 and then 16
again, overwriting the previous data. However,
LOG
LOG
LOG
LOG
CAL
LOG
LOG
OFF