Users Manual

35
LOGGING
12. LOGGING
This feature allows the user to log DO, BOD,OUR and SOUR measurements. All logged data can be
transfered to a PC using the USB Type C port.
Transfer is simple as the computer recognizes the USB connection. A spreadsheet program such as
Excel makes integration of the computer with the meter simple.
The maximum number of records is 4000.
12.1. LOGGING THE CURRENT DATA
To log the current measurement press LOG key.
The meter will display for a couple of seconds the record number and the amount of free space (in %).
If the maximum number of stored measurements is achieved, the “Log space is full” message will be
displayed for a few seconds when LOG key is pressed.
Enter RCL mode and delete records in order to free log space.
12.2. VIEW LOGGED DATA
Press RCL to retrieve the stored data while in the measurement mode (DO).
The list of records is displayed in the range it was measured (% sat. or mg/L).
Use / to select the desired record.
Press Delete All to enter Delete All screen. Press CFM to clear all logged records.