User Guide

WARRANTY

All Hanna controllers are warranted for two years against defects in

workmanship and materials when used for their intended purpose and

maintained according to instructions. Electrodes and probes are war-

ranted for a period of six months.

Damages due to accident, misuse, tampering or lack of prescribed main-

tenance are not covered. This warranty is limited to free of charge or

replacement of the meter only, if any malfunctioning is due to manufac-

turing defects.

If service is required, contact the dealer from whom you purchased the

instrument. If under warranty, report the model number, date of pur-

chase, serial number and the nature of failure. If the repair is not covered

by the warranty, you will be notified of the charges incurred. If the

instrument is to be returned to Hanna Instruments, first obtain a

Returned Goods Authorization Number from the Customer Service de-

partment and then send it with shipment costs prepaid. When shipping

any instrument, make sure it is properly packaged for complete protec-

tion.

All rights are reserved. Reproduction in whole or in part is prohibited without the written

consent of the copyright owner, Hanna Instruments Inc, 584 Park East Drive, Woonsocket,

Rhode Island, 02895, USA

Hanna Instruments reserves the right to modify the design, construction and

appearance of its products without advance notice.