User Guide

Recommendations for Users

Before using these products, make

sure that they are entirely suitable for

the environment in which they are

used.

Operation of these instruments in resi-

dential area could cause unacceptable

interferences to radio and TV equip-

ments, requiring the operator to take

all necessary steps to correct interfer-

ences.

Any variation introduced by the user

to the supplied equipment may de-

grade the instrument's EMC perfor-

mance.

To avoid electrical shock, do not use

these instruments when voltages at

the measurement surface exceed

24VAC or 60 VDC.

To avoid damages or burns, do not perform any measurement in microwave ovens.

All Hanna Instruments meters are warranted for two years against

defects in workmanship and materials when used for their intended

purpose and maintained according to instructions. The electrodes

and the probes are warranted for a period of six months. This

warranty is limited to repair or replacement free of charge.

Damages due to accident, misuse, tampering or lack of prescribed

maintenance are not covered.

If service is required, contact the dealer from whom you purchased the

instrument. If under warranty, report the model number, date of

purchase, serial number and the nature of the failure. If the repair is

not covered by the warranty, you will be notified of the charges

incurred. If the instrument is to be returned to Hanna Instruments, first

obtain a Returned Goods Authorization number from the Customer

Service department and then send it with shipping costs prepaid.

When shipping any instrument, make sure it is properly packaged for

complete protection.

Hanna Instruments reserves the right to modify the design, construc-

tion and appearance of its products without advance notice.

WARRANTY

CE DECLARATION OF CONFORMITY