User Guide

Windows

is registered Trademark of "Microsoft Co."

Excel

Lotus 1-2-3

HI98801 and HI98804 contain infrared transmitting circuitry.

Ensure there isn't any logging process active.

Press CH/TIME or TEMP/TIME to set the meter to time or date mode

and simply place your data-logger on a HI9200 Infrared Transmitter

(ensuring that the two infrared LEDs are placed on top of each other)

and the memory content can then be downloaded to your PC through

the HI9200's RS232 port. Just ensure that baud rate on instrument

(setup code 50) and on PC downloading program are set to the same

value.

During the data transfer the instrument dis-

plays the message "r 232".

To stop communication, press CH/TIME or TEMP/TIME to display the

temperature reading or take the meter out of the transmitter when it's

not displaying "r232".

Using the HI9200 Infrared Transmitter, all recorded data can be fed

to your Personal Computer for easy reproduction, storage or elabora-

tion without the need of cables between the meter and the transmitter.

Data transmission from the instrument to the PC is now much easier

with new HI92000 Windows

compatible application software offered

by Hanna Instruments.

HI92000 allows you to use the powerful capabilities of most spread

sheet programs (e.g. Excel

, Lotus 1-2-3

). Simply open your file

downloaded by HI92000 from your spread sheet program and then it

is possible to make any elaboration available with your software (e.g.

graphics, statistic analysis).

User friendly, HI92000 offers a variety of features and has an on line

help to support you throughout any situation.

To install HI92000 you need a 3.5" drive and a few minutes to follow

the instructions conveniently printed on the disk label.

DATA TRANSFER TO PC

HI 98801 - HI 98804 only