User Guide

HI 98701 - HI 98704

PRINTING FUNCTIONS

Two different modes to print data are available:

1. Timed printing; samples are printed at fixed time intervals. Data

lots from 01 to 16 are available.

2. Print on demand; samples are printed when the LOG key is

pressed. It's possible to perform the print on demand either in

normal mode or in Timed printing mode.

Note: In timed printing mode, channels with no probe connected are

not printed. If all the channels are disconnected, the message

"no connected probe" will scroll across the LCD.

Note: cold junction temperature is not printed.

TIMED PRINTING MODE

To start Timed printing, press ALT and LOG.

The lot number will be displayed for a few

seconds then the LOG symbol will appear on

LCD and a first set of data will be printed.

The printout provides the following informa-

tion:

a - Lot number

b - Logging interval

c - Date (only for the first printed

sample of the lot or of the day)

d - Sample number

e - Time

f - Readings ("----" means out of range).

Note: If no keys are pressed, the meter enters standby mode to

prolong the battery life and only the "LOG" indication will be

visible on LCD. While timed printing during the sleep mode, the

last printed reading will appear briefly on the LCD. To reacti-

vate the LCD press ON/OFF.

TO RETRIEVE LOGGED DATA

Logged data can be viewed on LCD or printed. To view or print logged

data see "TO SCAN LOGGED DATA" in the "SETUP MODE" paragraph.

The logging meters also allow the downloading of logged data to PC.

To download data to PC see "DATA TRANSFER TO PC" paragraph.