Wate rpro of DiST WP Conductivity/TDS Meters
OPERATION: • Remove the protective cap. • Turn the DiST WP on with the ON/OFF switch located on the top. • Immerse into the sample without touching the bottom of the beaker. • Stir gently and wait until the display stabilizes. DiST WP compensates for the temperature automatically and variations on the display can be due to the temperature sensor adjusting to the new environment. CALIBRATION: The calibration procedure is simple and fast.
Wate rpro of DiST WP Conductivity/TDS Meters SPECIFICATIONS: RANGE / RESOLUTION DiST WP 1 1999 ppm /1 ppm DiST WP 2 10.00 ppt /0.01 ppt DiST WP 3 1999 µS/cm /1 µS/cm DiST WP 4 19.99 mS/cm /0.
