User Guide

3938

CE DECLARATION OF CONFORMITYCE DECLARATION OF CONFORMITY

CE DECLARATION OF CONFORMITY

Recommendations for Users

Before using this product, make sure that it is entirely suitable for the environment in which it is used.

Operation of this instrument in residential area could cause unacceptable interferences to radio and TV

equipments, requiring the operator to take all necessary steps to correct interferences.

The glass bulb at the end of the electrode is sensitive to electrostatic discharges. Avoid touching this glass

bulb at all time.

During calibration of instruments, ESD wrist straps should be worn to avoid possible damage to the electrode

by electrostatic discharge.

Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC

performance.

To avoid electrical shock, do not use these instruments when voltages at the measurement surface exceed

24VAC or 60 VDC.

To avoid damages or burns, do not perform any measurement in microwave ovens.

WARRANTYWARRANTY

WARRANTY

All Hanna Instruments meters are warranted for two years

against defects in workmanship and materials when used for their

intended purpose and maintained according to instructions. The

electrodes and the probes are warranted for a period of six

months. This warranty is limited to repair or replacement free of

charge.

Damages due to accident, misuse, tampering or lack of prescribed

maintenance are not covered.

If service is required, contact the dealer from whom you purchased the

instrument. If under warranty, report the model number, date of

purchase, serial number and the nature of the failure. If the repair

is not covered by the warranty, you will be notified of the charges

incurred. If the instrument is to be returned to Hanna Instruments,

first obtain a Returned Goods Authorization number from the Cus-

tomer Service department and then send it with shipping costs

prepaid. When shipping any instrument, make sure it is properly

packaged for complete protection.

To validate your warranty, fill out and return the enclosed warranty

card within 14 days from the date of purchase.

All rights are reserved. Reproduction in whole or in part is

prohibited without the written consent of the copyright owner,

Hanna Instruments Inc., 584 Park East Drive, Woonsocket, Rhode

Island, 02895 , USA.

Hanna Instruments reserves the right to modify the design, construc-

tion and appearance of its products without advance notice.