Waterpro of pHep® 3 Pocket-Sized Microprocessor pH Meter
OPERATION: • Do not be alarmed if white crystals appear around the cap. This is normal with pH electrodes and they dissolve when rinsed with water. • Remove the protective cap and switch the unit on by pressing the ON/OFF key. 300 HI 70 • Immerse the electrode in your sample. Stir gently and wait until the display stabilizes. • After use, rinse the electrode with water to minimize contamination. • Store the electrode with a few drops of storage (HI 70300) or pH 7 (HI 7007) solution in the protective cap.
Waterpro of pHep® 3 Pocket-Sized Microprocessor pH Meter SPECIFICATIONS: RANGE 0.0 to 14.0 pH RESOLUTION 0.1 pH ACCURACY ±0.1 pH (@20°C/68°F) TYPICAL EMC ±0.1 pH DEVIATION TEMPERATURE Automatic from COMPENSATION 0 to 50°C (32 to 122°F) ENVIRONMENT 0 to 50°C (32 to 122°F) RH 100% BATTERY TYPE 4 x 1.4V alkaline LIFE 300 hours approx. DIMENSIONS 150x30x24 mm (5.9x1.2x0.9") WEIGHT 85 g (3 oz.
