User Guide

5
prefix for communication to
PC
NaCl key to display salinity settings
OFF key to turn the meter on off
ON key to turn the meter on
RANGE key to select dissolved oxygen
measurement mode in ppm
or in %
TEMP key to select temperature mea-
surement mode
TIME key to display the time
""
""
" key to select the calibration value;
to set date, time, logging in-
terval; to set the altitude and
the salinity factors; to set
the baud rate and command
prefix for communication to
PC.
THE REAR PANEL
1. Socket for D.O. Probe
2. Reset Button
3. RS 232C Connector
4. DC Power Socket (for HI710005 or
HI710006)
Unplug the meter from the power supply
before replacing the fuse.