User Guide

41
15) last sample time, min
E.g. "59" for 59 minute
16) last sample time, hour
E.g. "12" for 12 hour
17) last sample time, day
E.g. "09" for 9th day
18) last sample time, month
E.g. "09" for September
19) last sample time, year
E.g. "96" for year 1996
20) etx end
The meter will send "Err6" if in a different
measurement range.
Commands setting parameters:
/ML To select the data lot for data transfer.
E.g. send "/ML05" to select lot no. 5.
If the lot no. is valid, the meter will
send <ACK>, otherwise it will send
<CAN>.
/BR To set the RS232C baud rate.
E.g. send "/BR0" to set the meter to
baud rate of 150
send "/BR1" to set the meter to baud
rate of 300
send "/BR2" to set the meter to baud
rate of 600
send "/BR3" to set the meter to baud
rate of 1200
send "/BR4" to set the meter to baud
rate of 2400
send "/BR5" to set the meter to baud
rate of 4800
send "/BR6" to set the meter to baud
rate of 9600