User Guide

37
4) Channel #1 status
E.g. "1" for ppm logging se-
lected in this lot
"0" for ppm logging not
selected in this lot
5) Channel #2 status
E.g. "1" for % logging selected
in this lot
"0" for % logging not se-
lected in this lot
6) Channel #3 status
E.g. "1" for not used
"0" for not used
7) Channel #4 status
E.g. "1" for temperature logging
selected in this lot
"0" for temperature logging
not selected in this lot
8) ...
Repeat from 2 to 7 for the
next available lot No.
9) etx
?VM Requests the meter to send the se-
lected lot status. The data are sent in
the following order:
1) stx
2) Lot number
E.g. "01" for lot No. 1
3) Total number of samples per lot
E.g. "1234" for total no. of
samples: 1234.
4) Channel #1 status
E.g. "1" for ppm logging se-
lected in this lot
"0" for ppm logging not
selected in this lot