User Guide

30
INTERFACE WITH PC
Data transmission from the instrument to the
PC is now much easier with the new HI 92000
Windows
®
compatible application software of-
fered by Hanna Instruments.
User friendly, HI 92000 offers a variety of
features and has an on line help feature to
support you throughout all situations.
HI92000 allows you to use the powerful
means of the most diffused spread sheet
programs (e.g. Excel
©
, Lotus 1-2-3
©
). Simply
run your favorite spread sheet and open the
file downloaded by HI92000. It is then pos-
sible to make any elaboration available with
your software (e.g. graphics, statistical analy-
sis).
To install HI 92000 you need a 3.5" drive and
few minutes to follow the instructions conve-
niently printed on the disk's label.
Contact your Hanna Dealer to request a copy.
To connect your HI964400 to the PC use
HI 920010, available through your Hanna
Dealer. Make sure that your meter is switched
off and plug the connectors, one into the
meter RS232C connector, the other into the
serial port of your PC.
Note: Cables different from the HI920010
may use a different configuration. In
such case any communication between
the meter and the PC is not possible.
Excel
©
Copyright of "Microsoft Co."
Lotus 1-2-3
©
Copyright of "Lotus Co."
Windows
®
and Windows Terminal
®
are registered Trademark of "Microsoft Co."