User Guide

26
LOGGING FUNCTION
This function allows to log D.O. (in ppm or %)
together with the temperature automatically
without the necessity of an operator and for a
long period of time. All logged data can be
stored into a PC through the RS232C port.
The lot number goes from 1 to 99 and then
back to #1. The maximum capacity per lot is
8000 samples.
Set the appropriate logging interval (see
page 12). Select between 1, 15, 30 seconds
or 1, 5, 30, 60, 120, 180 minutes.
Press the RANGE key
first (to select D.O. read-
ings in ppm or in %),
then press the LOG and
then CAL key to enter
the logging mode.
Press the RANGE key to display the mea-
surement reading during the logging mode.
RANGE
LOGLOG
CAL
RANGE