User Guide

Recommendations for Users

Before using these products, make sure that they are entirely suitable for the environ-

ment in which they are used.

Operation of these instruments in residential areas could cause unacceptable interfer-

ences to radio and TV equipment.

The metal band at the end of the probe is sensitive to electrostatic discharges. Avoid

touching this metal band at all times.

During calibration of instruments, ESD wrist straps should be worn to avoid possible

damage to the probe by electrostatic discharge.

To maintain the EMC performance of this equipment the recommended cables noted in

the user's manual must be used.

Any variation introduced by the user to the supplied equipment may degrade the

instruments' EMC performance.

To avoid electrical shock, do not use these instruments when voltages at the measure-

ment surface exceed 24VAC or 60VDC.

To avoid damages or burns, do not perform any measurement in microwave ovens.

In particular cases the meters could turn off. In such cases they can be turned on by

pressing the ON/OFF key.

In particular cases the meters, except HI 9635, could change the measurement range.

In such cases they can be reverted to the desired range by pressing the proper key.

CE DECLARATION OF CONFORMITYCE DECLARATION OF CONFORMITY

CE DECLARATION OF CONFORMITY