User guide

ManualsBrandsHanna Instruments ManualsMeasuring instrumentsHI 95747C

18

REAGENT SETS

HI 95747-01 Reagents for 100 tests

HI 95747-03 Reagents for 300 tests

OTHER ACCESSORIES

HI 95747-11 CAL CHECK

TM

Standard Cuvets

(1 set)

HI 710009 Blue rubber boot

HI 710010 Orange rubber boot

HI 721310 9V battery (10 pcs)

HI 731318 Tissue for wiping cuvets (4 pcs)

HI 731331 Glass cuvets (4 pcs)

HI 731335 Caps for cuvets (4 pcs)

HI 93703-50 Cuvets cleaning solution (230 mL)

ACCESSORIES

Battery replacement must only take place in a

non-hazardous area.

Simply slide off the battery cover on the back of

the meter. Detach the battery from the terminals

and attach a fresh 9V battery while paying attention

to the correct polarity. Insert the battery and

replace the cover.

BATTERY REPLACEMENT

FACTORY CALIBRATION RESET

It is possible to restore factory calibration:

• Enter the

calibration mode

by holding CAL

CHECK

TM

for three seconds.

• Hold ZERO for 10 seconds. The display will

show for 2 seconds “F.CAL” and "747" appears.

The factory calibration is automatically restored

and the instrument is ready for measurement.