Instruction Manual HI 955502 Portable PT100 Thermometer This Instrument is in Compliance with the CE Directives http://www.hannainst.
Dear Customer, Thank you for choosing a Hanna Instruments Product. Please read this instruction manual carefully before using the instrument. This manual will provide you with all the necessary information for the correct use of the instrument, as well as a precise idea of its versatility in a wide range of applications. This instrument is in compliance with directives EN 50081-1 and EN 50082-1.
FUNCTIONAL DESCRIPTION AND SPECIFICATIONS OPERATIONAL GUIDE INITIAL PREPARATION Slide the battery cover off the rear of your thermometer. Unwrap the battery prior to connection to the battery connector. Insert the 9V battery and replace the cover. To switch on, press the ON/ OFF key on the front of the unit. To switch your thermometer off, press the ON/OFF key again. 1. Liquid Crystal Display 2. ON/OFF Key 3. Range Key Range Resolution Accuracy Low Range High Range To change the resolution press RANGE.
DISPLAY CODE GUIDE Display Description -1. The reading is out of range V Weak battery, needs to be replaced °C The instrument is reading in the Centigrade scale BATTERY REPLACEMENT When the battery is low the user is warned by the "V" symbol on the instrument's display. Replace the battery immediately. V Battery replacement must only take place in a non hazardous area using a 9V battery. CALIBRATION All Hanna Instruments thermometers have been accurately pre-calibrated at the factory.
SHOCKPROOF RUBBER BOOTS These rubber boots are specially made to prolong the life of your instruments and to prevent damages due to accidental falls. They measure 155 x 90 x 45 mm (6.1x3.5x1.8") and are available in two different colors: HI 710007 HI 710008 = blue colored = orange colored. Select the proper color according to your preference.
WARRANTY CE DECLARATION OF CONFORMITY All Hanna Instruments meters are warranted for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. The probes are warranted for a period of six months. This warranty is limited to repair or replacement free of charge. Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered.
PRINTEDIN PORTUGAL h t t p : / / w w w . h a n n a i n s t .
