User Guide

ManualsBrandsHanna Instruments ManualsThermometersHI 955201

Instruction Manual

HI 955201 - HI 955202

HI 955301 - HI 955302

Portable Microprocessor

Printing and Logging

PT-100 Thermometers

This Instrument is in Compliance with the CE Directives

www.hannainst.com

Untitled-10

Dear Customer,

Thank you for choosing a Hanna Instruments

Product.

Please read this instruction manual carefully

before using the instrument.

This manual will provide you with all the neces-

sary information for the correct use of the

instrument, as well as a precise idea of its

versatility in a wide range of applications.

These instruments are in compliance with

directives EN 50081-1 and EN 50082-1.

TABLE OF CONTENTS

Preliminary Examination ............................. 1

General Description .................................... 1

LCD Display Functional Description ........... 2

Functional Description HI 955201

and HI 955202 ............................................ 3

Functional Description HI 955301

and HI 955302 ............................................ 4

Specifications HI 955201 and HI 955202 .... 5

Specifications HI 955301 and HI 955302 .... 6

Initial Preparation ........................................ 7

Operational Guide ....................................... 9

Printing / Recording with HI 955201

and HI 955202 .......................................... 14

Printing / Logging with HI 955301

and HI 955302 .......................................... 16

Data Transfer to PC.................................. 28

Fault Functions ........................................ 29

Memory Organization ............................... 30

Printer Maintenance.................................. 31

Battery Replacement ................................ 33

Calibration ................................................. 34

Accessories .............................................. 35

Warranty ................................................... 36

CE Declaration of Conformity ................... 37

ISO 9000 Certified

Company since 1992

Summary of content (20 pages)

PAGE 1
Untitled-10 1 2 Instruction Manual HI 955201 - HI 955202 HI 955301 - HI 955302 Portable Microprocessor Printing and Logging PT-100 Thermometers Dear Customer, Thank you for choosing a Hanna Instruments Product. Please read this instruction manual carefully before using the instrument. This manual will provide you with all the necessary information for the correct use of the instrument, as well as a precise idea of its versatility in a wide range of applications.
PAGE 2
Untitled-10 3 4 PRELIMINARY EXAMINATION Remove the instrument from the packing material and examine it carefully to make sure that no damage has occurred during shipping. If there is any damage, notify your Dealer. Each printing thermometer is supplied complete with: • Paper Rolls (5 pcs) • 1.5V AA size Batteries (4 pcs) • Rugged Carrying Case Note: Save all packing material until you are sure that the instrument functions correctly.
PAGE 3
Untitled-10 5 6 FUNCTIONAL DESCRIPTION HI 955301 AND HI 955302 FUNCTIONAL DESCRIPTION HI 955201 AND HI 955202 1 1 2 2 3 4 3 °C 4 CH PT100 - PRINTING THERMOMETER DUAL CHANNEL 6 TEMP 10. 11.
PAGE 4
Untitled-10 7 8 SPECIFICATIONS HI 955201 AND HI 955202 HI 955201 Range Resolution SPECIFICATIONS HI 955301 AND HI 955302 HI 955202 HI 955301 -200.0 to 850.0°C Range 0.1/ 1°C selectable Resolution HI 955302 -200.0 to 850.0°C 0.1/ 1°C selectable Accuracy (@25°C/77°F) ±(0.1°C +0.1% of the actual reading) for one year, excluding probe error Accuracy (@25°C/77°F) ±(0.1°C +0.1% of the actual reading) for one year, excluding probe error Typical EMC Deviation ±0.5°C Typical EMC Deviation ±0.
PAGE 5
Untitled-10 9 10 INITIAL PREPARATION Each meter is supplied complete with batteries. Remove the back cover, unwrap the batteries and install them while paying attention to the polarity. To prepare the instrument for use, connect a PT-100 temperature probe to the connector located on the top of the instrument. To switch the HI 955201 and the HI 955202 on, press the ON/OFF key. ON/OFF To switch the HI 955301 and the HI 955302 on, press the TEMP key.
PAGE 6
Untitled-10 11 12 SETTING DATE / TIME / PRINTING INTERVAL (for HI955301 and HI955302 only) OPERATIONAL GUIDE SETTING THE PRINTING INTERVAL (for HI 955201 and HI 955202 only) Turn the instrument on by pressing the ON/OFF key. Press the INTV and the UP or DOWN keys simultaneously. ON/OFF Turn the instrument on by pressing the TEMP key. TEMP Press the ALT and the TIME keys simultaneously. The display will show the date setting. At the bottom of the display the year will be blinking.
PAGE 7
Untitled-10 13 14 Press the TIME key and the day will be flashing. To select the hour, press the UP or DOWN keys (24 hour clock). DATE UP TIME Use the UP or DOWN key to select the correct day. DOWN Press the TIME key and the minutes will start flashing. TIME UP DOWN INTV TIME Press the ALT and the TIME keys simultaneously and the display will now show the clock time with the printing interval flashing. ALT UP TIME INTV TEMP Use the UP or the DOWN keys to select the minutes.
PAGE 8
Untitled-10 15 16 TO VIEW DATE / TIME / TEMPERATURE (for HI955301 and HI 955302 only) To view the time press the TIME key. This also displays the selected interval time on the secondary LCD. TIME INTV TIME To view the date, press the UP key when the LCD is displaying the time. DATE UP To view temperature press TEMP key. °C CH TEMP Using UP or DOWN keys select channel #1 or #2 to monitor (HI 955302 only). The channel is displayed with "CH" and the number of channel.
PAGE 9
Untitled-10 17 18 If the second probe is not connected during the recording mode, the data from the second probe will not be printed. Data from the second channel can only be added if the recording mode is exited and a new log number is entered. A blinking "CH" will appear on the display next to the channel number not utilized and/or recorded. °C LOG TO STOP RECORDING In order to quit the recording mode, press the ON/OFF key.
PAGE 10
Untitled-10 19 20 ALT UP DOWN TEMP TIME LOG Log number Page number LOG The printer will print a complete set of data and the "LOG" symbol will appear on the bottom left corner of the LCD. ==07== 0005M 0001 *14.25 #1 25.0 °C. #2 27.3 °C. °C LOG CH To continue logging without printing, press now the ALT and the PAPER keys at the same time and the "LOG" symbol on display will start to blink.
PAGE 11
Untitled-10 21 22 If no key is pressed, the display goes blank after about 5 minutes. During printing, the display shows the time, interval and the “LOG” symbol. • TIME LOG INTV • • To reactivate the display press the TEMP key.
PAGE 12
Untitled-10 23 24 TO SCAN STORED DATA ON DISPLAY Press the LOG key. The display will show the log number and the page number of the next logging. Press UP and the temperature will be displayed. °C CH LOG While pressing the ALT key, press DOWN until the log number to scan appears on the secondary display. The primary display will show the number of samples of that particular log. Continue pressing UP to display all the memorized data of the same log one by one in the above sequence i.e.
PAGE 13
Untitled-10 25 26 Note: Before proceeding with printing, make sure there is enough paper for the data to be printed. When the paper is finished the meter will not advise the operator and printouts could be lost. If this happens, stop the printer by pressing ALT PAPER and PAPER simulta- PRINT neously. Data will be ALT UP kept in memory.
PAGE 14
Untitled-10 27 28 The meter is now in the printing/logging mode utilizing log number 1, page 16. "LOG" and P 15 shown in the secondary display indicate that the meter has entered the log mode, and has 15 pages of available memory remaining. After the initial printout, the time and printing/ logging interval will reappear. Step Four - Leaving the log mode: Once the number of samples stored in memory has reached 10, press the ALT and LOG keys.
PAGE 15
Untitled-10 29 30 Press UP to view the time. DATA TRANSFER TO PC TIME UP Press UP again to view the temperature. °C CH UP With HI955302 when both probes have been connected, press the UP key to view the other channel value. Step Six - Printing the stored data (samples 5 through 10): Press and hold ALT and press DOWN until the total number of samples recorded in log number 1 is displayed. ALT HI955301 and HI955302 provide infrared emitting circuitry.
PAGE 16
Untitled-10 31 32 HI92000 allows you to use the powerful means of the most diffused spread sheet programs (e.g. Excel©, Lotus 1-2-3 ©). Simply run your favorite spread sheet and open the file downloaded by HI 92000. It is then possible to make any elaboration available with your software (e.g. graphics, statistic analysis). To install HI 92000 you need a 3.5" drive and a few minutes to follow the instructions conveniently printed on the disk's label.
PAGE 17
Untitled-10 33 34 PRINTER MAINTENANCE Allow approximately 5 cm (2") to exit from the printer and replace the paper cover. TO CHANGE THE INK CARTRIDGE When printouts become faint, it might be necessary to change the ink cartridge. Contact your Hanna authorized center. TO INSERT THE PAPER ROLL The HI 955201, HI955202, HI 955301 and HI 955302 use plain paper rolls 38 mm width. To insert a new roll is very easy. Open the paper cover pulling it gently.
PAGE 18
Untitled-10 35 36 Note: The instrument uses the following configuration. BATTERY REPLACEMENT If "LO BAT" appears on the display, it is an indication that the batteries are running down. If it appears during printing, it means that 200 printouts can be made before the batteries are exhausted. When there is only sufficient power for 100 printouts, the "LO BAT" sign is displayed continuously on the LCD.
PAGE 19
Untitled-10 37 38 ACCESSORIES WARRANTY PT-100 Temperature Probes HI768A Air probe, with 1 m (3.3') cable HI768L General purpose liquid probe, with 1 m (3.3') cable HI 768P Penetration probe with 1 m (3.3') cable All Hanna Instruments meters are warranted for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. 205mm 8.1" 100mm 3.9" 3mm 0.12" The probes are warranted for a period of six months.
PAGE 20
Untitled-10 39 40 CE DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY We Hanna Instruments Srl V.le delle industrie 12 35010 Ronchi di Villafranca (PD) ITALY herewith certify that the thermometers HI 955201 HI 955202 HI 955301 HI 955302 have been tested and found to be in compliance with the following regulations: IEC 801-2 IEC 801-3 IEC 801-4 EN 55022 Electrostatic Discharge RF Radiated Fast Transient Radiated, Class B Date of Issue: 16-05-1996 PRINTED IN ITALY D.