User Guide

2
ISO 9000 Certified
Company since 1992
Dear Customer,
Thank you for choosing a Hanna product.
Please read this instruction manual carefully before using the meter.
This manual will provide you with the necessary information for a
correct use of the instrument.
If you need additional technical information, do not hesitate to e-mail
us at [e-mail].
This instrument is in compliance with the directives EN 50081-1
and EN 50082-1.
TABLE OF CONTENTSTABLE OF CONTENTS
TABLE OF CONTENTSTABLE OF CONTENTS
TABLE OF CONTENTS
PRELIMINARY EXAMINATION ........................................................ 3
GENERAL DESCRIPTION ................................................................ 3
PRINCIPLE OF OPERATION ........................................................... 4
DISPLAY CODE GUIDE .................................................................. 6
TIPS FOR AN ACCURATE MEASUREMENT ....................................... 7
FUNCTIONAL DESCRIPTION & SPECIFICATIONS.............................. 8
OPERATIONAL GUIDE ................................................................... 9
BATTERY REPLACEMENT .............................................................. 11
OTHER SPECTROPHOTOMETERS FROM HANNA ............................ 12
ACCESSORIES ............................................................................. 13
WARRANTY ................................................................................ 13
CE DECLARATION OF CONFORMITY.............................................. 15
15
CE DECLARATION OF CONFORMITYCE DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITYCE DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITY
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment in which it is
used.
Operation of this instrument in residential areas could cause unacceptable interferences to radio and TV
equipments, requiring the operator to take all necessary steps to correct interferences.
Any variation introduced by the user to the supplied equipment may degrade the instruments' EMC
performance.
To avoid damages or burns, do not perform any measurement in microwave ovens.