User Guide

2
Dear Customer,
Thank you for choosing a Hanna product.
Please read this instruction manual carefully before using the instrument.
This manual will provide you with the necessary information for correct
use of the instrument, as well as a more precise idea of its versatility.
If you need additional technical information, do not hesitate to e-mail
us at [e-mail].
These instruments are in compliance with the directives.
WARRANTY
All Hanna Instruments meters are warranted for two years against
defects in workmanship and materials when used for their intended
purpose and maintained according to instructions. Sensors and probes
are warranted for a period of six months.
This warranty is limited to repair or replacement free of charge.
Damages due to accidents, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure.
First obtain a Returned Goods Authorization number from the Customer
Service department, then return the instrument with the Authorization
# included along with shipment costs prepaid. If the repair is not
covered by the warranty, you will be notified of the charges.
When shipping any instrument, make sure it is properly packaged for
complete protection.
TABLE OF CONTENTS
PRELIMINARY EXAMINATION ........................................................ 3
GENERAL DESCRIPTION ................................................................3
HI 9041, SPECIFICATIONS ........................................................... 4
HI 9061, SPECIFICATIONS ........................................................... 5
HI 93501, SPECIFICATIONS .........................................................6
HI 93502, SPECIFICATIONS .........................................................7
HI 93503, SPECIFICATIONS .........................................................8
HI 935007, SPECIFICATIONS .......................................................9
OPERATIONAL GUIDE ................................................................. 10
FACTORY RECALIBRATION ........................................................... 13
TEMPERATURE PROBES .............................................................. 14