User Guide

9
8
SPECIFICATIONS HI 931700
HI 931700
Range 0.00 to 14.00 pH
Resolution 0.01 pH
Accuracy ±0.02 pH
Typical EMC
Deviation
Installation Cat. II
Input 10
12
Ohm
Calibration Offset: ±2 pH through Offset trimmer
Slope: 80 to 110% through slope trimmer
Readout 4-digit LCD plus graphic symbols
Recorder Output 0 to 20mA or 4 to 20mA (not isolated)
Set Point Relay Isolated, 2A, max 240 V,
resistive load, 1.000.000 strokes
Power Supply 115±10% or 230±10% VAC, 50/60 Hz
or 15-24VDC (according to the model)
Environment -10 to 50°C (14 to 122°F)
Weight 130 g (4.58 oz)
SPECIFICATIONS HI 932700
HI 932700
Range -1000 to +1000 mV
Resolution 1 mV
Accuracy ±5 mV
Typical EMC
Deviation
Installation Cat. II
Input 10
12
Ohm
Calibration Slope: 90 to 110% through slope trimmer
Readout 4-digit LCD plus graphic symbols
Recorder Output 0 to 20 mA or 4 to 20 mA (not isolated)
Set Point Relay Isolated, 2 A, max 240 V,
resistive load, 1.000.000 strokes
Power Supply 115±10% or 230±10% VAC, 50/60 Hz
or 15-24VDC (according to the model)
Environment -10 to 50°C (14 to 122°F)
Weight 130 g (4.58 oz)
±0.02 pH
±2 mV
MECHANICAL DIMENSIONS
Front view of the panel-mounted unit.
Dimensions show the cutout size for the instal-
lation and also the outside dimensions of the
panel.
Side view of the panel-mounted unit.
Adjustable location brackets (supplied with
the meter) allow the controller to slide into the
cutout and will hold the unit securely in place.
95 mm (3.74") is the minimum amount of
space required to install the controller with the
cables connected.
73mm
2.87"
79mm
3.11"
42mm
1.65"
49mm
1.93"
95mm MIN
3.74"
76mm
3"
0.25/4mm
0.01/0.160"
79mm
3.11"
ADJUSTABLE
LOCATION
BRACKET