User Guide

28
INTERFACE WITH PC (HI931402 ONLY)
Data transmission from the instrument to the
PC is now much easier with the new HI 92000
Windows
®
compatible application software of-
fered by Hanna Instruments.
User friendly, HI 92000 offers a variety of
features and has an on line help feature to
support you throughout all situations.
HI92000 allows you to use the powerful means
of the most diffused spread sheet programs
(e.g. Excel
©
, Lotus 1-2-3
©
). Simply run your
favorite spread sheet and open the file down-
loaded by HI 92000. It is then possible to
make any elaboration available with your soft-
ware (e.g. graphics, statistical analysis).
To install HI 92000 you need a 3.5" drive and
few minutes to follow the instructions conve-
niently printed on the disk's label.
In your copy of HI92000 you will also find a
set of configuration files for your Windows
Terminal
®
program to send commands di-
rectly from the PC keyboard (see appendix
for commands description and usage).
Contact your Hanna Dealer to request a copy.
To connect your HI 931402 to the PC use
HI 920010, available through your Hanna
Dealer. Make sure that your meter is switched
off and plug the connectors, one into the
meter RS232C connector, the other into the
serial port of your PC.
Note: Cables different from the HI 920010 may
use a different configuration. In such
case any communication between the
meter and the PC is not possible.
Excel
©
Copyright of "Microsoft Co."
Lotus 1-2-3
©
Copyright of "Lotus Co."
Windows
®
and Windows Terminal
®
are registered Trademark of "Microsoft Co."