User Guide

27
Capacity: 8,000 data samples which are di-
vided into 16 pages.
Each time a new logging period starts, it
automatically starts from a new page.
If “LOGGING” is still on, and the available
page is “0” the meter will overwrite the first
LOT DATA in the existing memory. During
logging the meter automatically returns to the
oldest page in the memory and if it contains
data, it will overwrite it. In this case the first
log will not correspond to the oldest set of
data.
It is recommended to periodically “clean” the
memory. Save all data in a PC if you need to
keep a record and then disconnect the bat-
teries for approximately 1 minute. If you do
this, remember to set the date and time,
once the batteries have been connected again.
ATTENTION:
Data is stored in memory until the batteries
are removed.
To replace batteries without loosing data, plug
the adapter in and proceed with battery re-
placement as described on page 32. Only
once the batteries have been replaced it is
possible to unplug the adapter without loos-
ing the stored data.
MEMORY ORGANIZATION