User Guide

23
LOGGING MODE
In this mode data will be stored directly into
memory for later retrival.
Set the appropriate logging interval (see Op-
erational Guide section on page 6).
Press the ALT and the LOG keys simulta-
neously to enter the logging mode. The log
number and page number will appear for a
few seconds on the display to indicate the
correct operational mode.
When the meter is in log-
ging mode, "LOG" is dis-
played on the bottom left
corner of the LCD with the time on the pri-
mary display and the logging interval on the
secondary one.
During logging, press the LOG key to show
the total number of data that has been logged
(sample number).
To view measurements during logging press
the RANGE key and the display will show
the temperature.
LOGGING FUNCTION (HI931300 only)
CAL
ON/OFF
ALT
LOG
TIME
LOG
INTV
LOG
RANGE
°C