User Guide

ManualsBrandsHanna Instruments ManualsOtherHI 92801

SPECIFICATIONSSPECIFICATIONS

SPECIFICATIONS

HI 92701 AND HI 92704HI 92701 AND HI 92704

HI 92701 AND HI 92704

HI 92701C HI 92701F

HI 92704C HI 92704F

Range -200.0 to 999.9°C -300.0 to 999.9°F

1000 to 1370°C 1000 to 2500°F

Resolution 0.1/1°C 0.2/1°F

Accuracy ±0.3% of reading ±0.3% of reading

(@25°C/77°F) or ±0.5°C or ±1°F

for one year, excluding probe error

Typical EMC Deviation ±5°C ±10°F

Power Supply 4x1.5V AA size, 500 hours with 60' printing

interval. Socket for 12VDC adapter

Auto Shut-off After 5 minutes of non-use

Channels 1 for HI 92701; 4 for HI 92704

Printer Low-power impact belt type, 14 characters per line

using 38 mm plain paper

Printing Intervals 1, 2, 5, 10, 15, 30, 60, 120 and 180 minutes

Environment 0 to 50 °C (32 to 122°F) Max. 95% RH

Dimensions 220 x 82 x 66 mm (8.7 x 3.2 x 2.6")

Shipping Instrument: 500g (18 oz.)

Weight Kit: 1.4 kg (3.1 lb.)

SPECIFICATIONSSPECIFICATIONS

SPECIFICATIONS

HI 92801 AND HI 92804HI 92801 AND HI 92804

HI 92801 AND HI 92804

HI 92801C HI 92801F

HI 92804C HI 92804F

Range -200.0 to 999.9°C -300.0 to 999.9°F

1000 to 1370°C 1000 to 2500°F

Resolution 0.1/1°C 0.2/1°F

Accuracy ±0.3% of reading ±0.3% of reading

(@25°C/77°F) or ±0.5°C or ±1°F

for one year, excluding probe error

Typical EMC Deviation ±5°C ±10°F

Power Supply 4x1.5V AA size, 500 hours with 60' printing

interval. Socket for 12VDC adapter

Auto Shut-off After 5 minutes of non-use

Channels 1 for HI 92801; 4 for HI 92804

Printer Low-power impact belt type, 14 characters per line

using 38 mm plain paper

Printing/Logging Intervals 1, 2, 5, 10, 15, 30, 60, 120 and 180 minutes

Environment 0 to 50 °C (32 to 122°F) Max. 95% RH

Dimensions 220 x 82 x 66 mm (8.7 x 3.2 x 2.6")

Shipping Instrument: 500g (18 oz.)

Weight Kit: 1.4 kg (3.1 lb.)

Untitled-27

ON/OFF

TEMP

INITIAL PREPARATION

Each meter is supplied complete with batteries. Remove the back

cover, unwrap the batteries and install them while paying attention

to the polarity.

To prepare the instrument for use, connect a K-type thermocouple

temperature probe to the connector located on the top of the

instrument.

To switch the HI92701 and the HI92704 on,

press the ON/OFF key.

To switch the HI92801 and the HI92804 on,

press the TEMP key.

Choose the most appropriate temperature probe(s) for your applica-

tion (see page 30) and connect it (them) to the meter.

HI 92701 and HI 92801 have a single probe connection.

HI 92704 and HI 92804 have four probe connectors.

With the meter facing you, channel #1 is the first connector on the

top left hand side.

If the temperature probe is not connected to the instrument, the

meter will display and print "----" to alert the user.

This also indicates the possibility of a broken probe cable. The channel

is displayed with "CH" and the number of channel (four channels

versions only).

Note: To ensure accurate readings it is recommended that the

temperature probes be connected to consecutive channels be-

ginning with channel #1. For example, if only one probe is to

be used, it must be connected to channel #1. If 2, 3 or 4

probes are to be used, they must be connected to channels 1,

2, 3, and 4 in ascending order.

°C

OPERATIONAL GUIDEOPERATIONAL GUIDE

OPERATIONAL GUIDE