User Guide

35
TEMPERATURE PROBES
Hanna Instruments offers a wide range of probes
to meet all your requirements (from liquids to
air and penetration to surface). These probes
use highly sensitive thermistor sensors which
provide greater accuracy, faster response and
a temperature range that is superior to conven-
tional thermistor probes. All Hanna tempera-
ture probes are supplied pre-calibrated from
the factory and are ready to be used with your
meter. The probes are easy to connect to your
meter with a standard RCA connector. Com-
pletely interchangeable, these probes make it
possible for you to switch from one to another
without wasting time and money going through
tedious calibration procedures. They are avail-
able in different handle colors to avoid cross
contamination during testing:
HI762A Air probe, with 1 m (3.3') cable
and white handle
HI762A/10 Air probe, with 10 m (33') cable
and white handle
HI762BL General purpose liquid probe,
with 1m (3.3') cable and black
handle
HI762L General purpose liquid probe,
with 1m (3.3') cable and white
handle
HI 762L/2 General purpose liquid probe,
with 2m (6.6') cable and white
handle
HI 762L/10 General purpose liquid probe,
with 10m (33') cable and white
handle
HI762PBL Penetration probe with 1 m
(3.3') cable and blue handle
HI762PBL/10 Penetration probe with 10 m
(33') cable and blue handle
HI762PG Penetration probe with 1 m
(3.3') cable and green handle