User Guide

Hanna Instruments offers a wide range of probes to meet all your

requirements (from liquids to air and penetration to surface). These

probes use highly sensitive thermistor sensors which provide greater

accuracy, faster response and a temperature range that is superior to

conventional thermistor probes. All Hanna temperature probes are

supplied precalibrated from the factory and are ready to be used with

your meter. The probes are easily to your meter with a standard

connector. Completely interchangeable, these probes make it possible

for you to switch from one to another without wasting time and money

going through tedious calibration procedures. They are available with

different handle colors to avoid cross contamination during testing:

HI 762A Air probe, with 1 m (3.3') cable and white handle

HI 762A/10 Air probe, with 10 m (33') cable and white handle

HI 762BL General purpose liquid probe, with 1 m (3.3') cable

and black handle

HI 762L General purpose liquid probe, with 1 m (3.3') cable

and white handle

HI 762L/2 General purpose liquid probe, with 2 m (6.6') cable

and white handle

HI 762L/10 General purpose liquid probe, with 10 m (33') cable

and white handle

HI 762PBL Penetration probe with 1 m (3.3') cable and blue

handle

HI 762PBL/10 Penetration probe with 10 m (33') cable and blue

handle

HI 762PG Penetration probe with 1 m (3.3') cable and green

handle

HI 762PG/10 Penetration probe with 10 m (33') cable and green

handle

HI 762PR Penetration probe with 1 m (3.3') cable and red

handle

HI 762PR/10 Penetration probe with 10 m (33') cable and red

handle

HI 762PW Penetration probe with 1 m (3.3') cable and white

handle

HI 762PW/10 Penetration probe with 10 m (33') cable and white

handle

TEMPERATURE PROBES