User Guide

24
While pressing the ALT key, press the  key until the log number to
scan appears on the secondary display. The primary display will show
the number of samples in that particular log.
Press the ALT and the TEMP keys simultaneously. This now shows the
date when log started.
Press the  key and the time of the most recent sample will be
displayed.
ALT
+
ALT
TEMP
+
Press the  key and the temperature will be displayed.
Continue pressing the  key to display one by one all the memo-
rized data of the same log in the above sequence i.e. time and
temperature.
Press the  key to revert back to sampling time and scan the
samples.
To exit from the recall mode press the LOG
key.
Note: this mode will not alter data already
in the memory.
LOG