User Guide

23
• It is possible to insert a new paper roll during logging session (see
page 32).
• Once in the logging mode, the printer cannot be stopped unless
the password is entered (unless the password is 0000).
• The interval cannot be changed during logging mode.
Exit the recording mode by pressing ALT and LOG and entering the
password before setting the new interval.
• If PRT is pressed while in logging mode,
a printout is produced without affecting
the running sample number.
TO STOP LOGGING
Press the ALT and the LOG keys simultaneously and enter the pass-
word. This will generate an exit status printout.
ALT
LOG
+
LOG
PRT
ALT
LOG
+
10-01-96
==07== 0005M
0016 *16.25
#1 20.0 °C
#2 57.3 °C
.
.
Log number
Total sample number
LOG EX
IT
Date/Tim
e
TO SCAN STORED DATA ON DISPLAY
Press the LOG key. The display will show the log number and the
remaining page numbers.
LOG